| Message ID | 1480183585-592-19-git-send-email-yamada.masahiro@socionext.com |
|---|---|
| State | New |
| Headers | show |
On Sun, 27 Nov 2016 03:06:04 +0900 Masahiro Yamada <yamada.masahiro@socionext.com> wrote: > This will be needed in the next commit to call denali_read_page_raw() > from denali_read_page(). Please squash this change into patch 19. It's clearly useless to dissociate them. > > Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> > --- > > drivers/mtd/nand/denali.c | 76 +++++++++++++++++++++++------------------------ > 1 file changed, 38 insertions(+), 38 deletions(-) > > diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c > index c101e7f..f035dac 100644 > --- a/drivers/mtd/nand/denali.c > +++ b/drivers/mtd/nand/denali.c > @@ -1118,6 +1118,44 @@ static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, > return 0; > } > > +static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, > + u8 *buf, int oob_required, int page) > +{ > + struct denali_nand_info *denali = mtd_to_denali(mtd); > + dma_addr_t addr = denali->buf.dma_buf; > + size_t size = mtd->writesize + mtd->oobsize; > + u32 irq_mask = INTR_STATUS__DMA_CMD_COMP; > + > + if (page != denali->page) { > + dev_err(denali->dev, > + "IN %s: page %d is not equal to denali->page %d", > + __func__, page, denali->page); > + BUG(); > + } > + > + setup_ecc_for_xfer(denali, false, oob_required ? true : false); > + denali_enable_dma(denali, true); > + > + dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); > + > + clear_interrupts(denali); > + denali_setup_dma(denali, DENALI_READ); > + > + /* wait for operation to complete */ > + wait_for_irq(denali, irq_mask); > + > + dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); > + > + denali_enable_dma(denali, false); > + > + memcpy(buf, denali->buf.buf, mtd->writesize); > + if (oob_required) > + memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, > + mtd->oobsize); > + > + return 0; > +} > + > static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, > u8 *buf, int oob_required, int page) > { > @@ -1182,44 +1220,6 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, > return max_bitflips; > } > > -static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, > - u8 *buf, int oob_required, int page) > -{ > - struct denali_nand_info *denali = mtd_to_denali(mtd); > - dma_addr_t addr = denali->buf.dma_buf; > - size_t size = mtd->writesize + mtd->oobsize; > - u32 irq_mask = INTR_STATUS__DMA_CMD_COMP; > - > - if (page != denali->page) { > - dev_err(denali->dev, > - "IN %s: page %d is not equal to denali->page %d", > - __func__, page, denali->page); > - BUG(); > - } > - > - setup_ecc_for_xfer(denali, false, oob_required ? true : false); > - denali_enable_dma(denali, true); > - > - dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); > - > - clear_interrupts(denali); > - denali_setup_dma(denali, DENALI_READ); > - > - /* wait for operation to complete */ > - wait_for_irq(denali, irq_mask); > - > - dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); > - > - denali_enable_dma(denali, false); > - > - memcpy(buf, denali->buf.buf, mtd->writesize); > - if (oob_required) > - memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, > - mtd->oobsize); > - > - return 0; > -} > - > static u8 denali_read_byte(struct mtd_info *mtd) > { > struct denali_nand_info *denali = mtd_to_denali(mtd);
Hi Boris, 2016-11-28 1:10 GMT+09:00 Boris Brezillon <boris.brezillon@free-electrons.com>: > On Sun, 27 Nov 2016 03:06:04 +0900 > Masahiro Yamada <yamada.masahiro@socionext.com> wrote: > >> This will be needed in the next commit to call denali_read_page_raw() >> from denali_read_page(). > > Please squash this change into patch 19. It's clearly useless to > dissociate them. > I will. But as I mentioned in the reply to 19/39, I am thinking that another solution may be possible. In that case, both 18/39 and 19/39 will be unnecessary. -- Best Regards Masahiro Yamada
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index c101e7f..f035dac 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1118,6 +1118,44 @@ static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, return 0; } +static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + u8 *buf, int oob_required, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + dma_addr_t addr = denali->buf.dma_buf; + size_t size = mtd->writesize + mtd->oobsize; + u32 irq_mask = INTR_STATUS__DMA_CMD_COMP; + + if (page != denali->page) { + dev_err(denali->dev, + "IN %s: page %d is not equal to denali->page %d", + __func__, page, denali->page); + BUG(); + } + + setup_ecc_for_xfer(denali, false, oob_required ? true : false); + denali_enable_dma(denali, true); + + dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); + + clear_interrupts(denali); + denali_setup_dma(denali, DENALI_READ); + + /* wait for operation to complete */ + wait_for_irq(denali, irq_mask); + + dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); + + denali_enable_dma(denali, false); + + memcpy(buf, denali->buf.buf, mtd->writesize); + if (oob_required) + memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, + mtd->oobsize); + + return 0; +} + static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, u8 *buf, int oob_required, int page) { @@ -1182,44 +1220,6 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, return max_bitflips; } -static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - u8 *buf, int oob_required, int page) -{ - struct denali_nand_info *denali = mtd_to_denali(mtd); - dma_addr_t addr = denali->buf.dma_buf; - size_t size = mtd->writesize + mtd->oobsize; - u32 irq_mask = INTR_STATUS__DMA_CMD_COMP; - - if (page != denali->page) { - dev_err(denali->dev, - "IN %s: page %d is not equal to denali->page %d", - __func__, page, denali->page); - BUG(); - } - - setup_ecc_for_xfer(denali, false, oob_required ? true : false); - denali_enable_dma(denali, true); - - dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); - - clear_interrupts(denali); - denali_setup_dma(denali, DENALI_READ); - - /* wait for operation to complete */ - wait_for_irq(denali, irq_mask); - - dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); - - denali_enable_dma(denali, false); - - memcpy(buf, denali->buf.buf, mtd->writesize); - if (oob_required) - memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, - mtd->oobsize); - - return 0; -} - static u8 denali_read_byte(struct mtd_info *mtd) { struct denali_nand_info *denali = mtd_to_denali(mtd);
This will be needed in the next commit to call denali_read_page_raw() from denali_read_page(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- drivers/mtd/nand/denali.c | 76 +++++++++++++++++++++++------------------------ 1 file changed, 38 insertions(+), 38 deletions(-) -- 2.7.4