diff mbox

[09/11] hisi_sas: check SATA FIS when directly attaching SATA device

Message ID 1478522920-108145-10-git-send-email-john.garry@huawei.com
State New
Headers show

Commit Message

John Garry Nov. 7, 2016, 12:48 p.m. UTC 
From: Xiang Chen <chenxiang66@hisilicon.com>


Check ERR bit of status to decide whether there is something wrong with
initial register-D2H FIS. If error exists, PHY reset the channel to
restart OOB.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>

Signed-off-by: John Garry <john.garry@huawei.com>

---
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

-- 
1.9.1

Comments

Zhangfei Gao Nov. 16, 2016, 1:49 a.m. UTC | #1 
On Mon, Nov 7, 2016 at 8:48 PM, John Garry <john.garry@huawei.com> wrote:
> From: Xiang Chen <chenxiang66@hisilicon.com>

>

> Check ERR bit of status to decide whether there is something wrong with

> initial register-D2H FIS. If error exists, PHY reset the channel to

> restart OOB.

>

> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>

> Signed-off-by: John Garry <john.garry@huawei.com>


Reviewed-by: Zhangfei Gao <zhangfei.gao@linaro.org>
diff mbox

Patch

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index a5faa4d..cda3baf 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -2537,6 +2537,16 @@  static irqreturn_t sata_int_v2_hw(int irq_no, void *p)
 		goto end;
 	}
 
+	/* check ERR bit of Status Register */
+	if (fis->status & ATA_ERR) {
+		dev_warn(dev, "sata int: phy%d FIS status: 0x%x\n", phy_no,
+				fis->status);
+		disable_phy_v2_hw(hisi_hba, phy_no);
+		enable_phy_v2_hw(hisi_hba, phy_no);
+		res = IRQ_NONE;
+		goto end;
+	}
+
 	if (unlikely(phy_no == 8)) {
 		u32 port_state = hisi_sas_read32(hisi_hba, PORT_STATE);