| Message ID | 20161020155831.4212-2-semen.protsenko@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On Thu, Oct 20, 2016 at 06:58:28PM +0300, Sam Protsenko wrote: > Some boards (like AM57x EVM) has USB OTG controller other than 0. So in > order to use correct controller number in compiled environment we should > define CONFIG_FASTBOOT_USB_DEV option. > > For example, when doing "fastboot reboot-bootloader" we want to enter > fastboot mode automatically. But to do so we need to provide controller > number to "fastboot" command. If this procedure is defined in some config > which is common to bunch of boards, and boards have different USB > controller numbers, we can't just hardcode "fastboot 0" in the > environment. We need to use configurable option, which this patch adds. > > Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> -- Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
diff --git a/cmd/fastboot/Kconfig b/cmd/fastboot/Kconfig index 5d2facc..d555d0a 100644 --- a/cmd/fastboot/Kconfig +++ b/cmd/fastboot/Kconfig @@ -41,6 +41,14 @@ config FASTBOOT_BUF_SIZE downloads. This buffer should be as large as possible for a platform. Define this to the size available RAM for fastboot. +config FASTBOOT_USB_DEV + int "USB controller number" + default 0 + help + Some boards have USB OTG controller other than 0. Define this + option so it can be used in compiled environment (e.g. in + CONFIG_BOOTCOMMAND). + config FASTBOOT_FLASH bool "Enable FASTBOOT FLASH command" help
Some boards (like AM57x EVM) has USB OTG controller other than 0. So in order to use correct controller number in compiled environment we should define CONFIG_FASTBOOT_USB_DEV option. For example, when doing "fastboot reboot-bootloader" we want to enter fastboot mode automatically. But to do so we need to provide controller number to "fastboot" command. If this procedure is defined in some config which is common to bunch of boards, and boards have different USB controller numbers, we can't just hardcode "fastboot 0" in the environment. We need to use configurable option, which this patch adds. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> --- cmd/fastboot/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) -- 2.9.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot