@@ -70,14 +70,18 @@
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x000>;
+ clocks = <&sys_clk 33>;
enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x001>;
+ clocks = <&sys_clk 33>;
enable-method = "psci";
+ operating-points-v2 = <&cluster0_opp>;
};
};
@@ -86,6 +90,40 @@
method = "smc";
};
+ cluster0_opp: opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@245000000 {
+ opp-hz = /bits/ 64 <245000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@490000000 {
+ opp-hz = /bits/ 64 <490000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ clock-latency-ns = <300>;
+ };
+ opp@653334000 {
+ opp-hz = /bits/ 64 <653334000>;
+ clock-latency-ns = <300>;
+ };
+ opp@666667000 {
+ opp-hz = /bits/ 64 <666667000>;
+ clock-latency-ns = <300>;
+ };
+ opp@980000000 {
+ opp-hz = /bits/ 64 <980000000>;
+ clock-latency-ns = <300>;
+ };
+ };
+
clocks {
refclk: ref {
compatible = "fixed-clock";
Add a CPU clock to every CPU node and a CPU OPP table to use the generic cpufreq driver. Note: clock-latency-ns (300ns) was calculated based on the CPU-gear switch sequencer spec; it takes 12 clock cycles on the sequencer running at 50 MHz, plus a bit additional latency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- Changes in v2: - Match the node name to the opp-hz property. arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 38 ++++++++++++++++++++++++ 1 file changed, 38 insertions(+) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html