| Message ID | 1454407782-24674-2-git-send-email-leo.yan@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Tue, Feb 02, 2016 at 06:09:39PM +0800, Leo Yan wrote: > Document DT binding for Hisilicon Hi6220 mailbox driver. > > Signed-off-by: Leo Yan <leo.yan@linaro.org> > --- > .../bindings/mailbox/hisilicon,hi6220-mailbox.txt | 74 ++++++++++++++++++++++ > 1 file changed, 74 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt One nit, otherwise: Acked-by: Rob Herring <robh@kernel.org> > > diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt > new file mode 100644 > index 0000000..8508c8a > --- /dev/null > +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt > @@ -0,0 +1,74 @@ > +Hisilicon Hi6220 Mailbox Driver > +=============================== > + > +Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel > +is unidirectional with a maximum message size of 8 words. I/O is > +performed using register access (there is no DMA) and the cell > +raises an interrupt when messages are received. > + > +Mailbox Device Node: > +==================== > + > +Required properties: > +-------------------- > +- compatible: Shall be "hisilicon,hi6220-mbox" > +- reg: Contains the mailbox register address range (base > + address and length); the first item is for IPC > + registers, the second item is shared buffer for > + slots. > +- #mbox-cells: Common mailbox binding property to identify the number > + of cells required for the mailbox specifier. Must be 3. > + <&phandle slot_id dst_irq ack_irq> > + phandle: Label name of mailbox controller > + slot_id: Slot id used either for TX or RX > + dst_irq: IRQ identifier index number which used by MCU > + ack_irq: IRQ identifier index number with generating a > + TX/RX interrupt to application processor, > + mailbox driver uses it to acknowledge interrupt > +- interrupts: Contains the interrupt information for the mailbox > + device. The format is dependent on which interrupt > + controller the SoCs use. > + > +Optional Properties: > +-------------------- > +- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver > + use this flag to ask MCU to enable "automatic idle > + flag" mode or IRQ generated mode to acknowledge a TX > + completion. > + > +Example: > +-------- > + > + mailbox: mailbox@F7510000 { use lowercase for hex > + compatible = "hisilicon,hi6220-mbox"; > + reg = <0x0 0xF7510000 0x0 0x1000>, /* IPC_S */ > + <0x0 0x06DFF800 0x0 0x0800>; /* Mailbox */ and here too. > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; > + #mbox-cells = <3>; > + }; > + > + > +Mailbox client > +=============== > + > +Required properties: > +-------------------- > +- compatible: Many (See the client docs). > +- mboxes: Standard property to specify a Mailbox (See ./mailbox.txt) > + Cells must match 'mbox-cells' (See Mailbox Device Node above). > + > +Optional Properties: > +-------------------- > +- mbox-names: Name given to channels seen in the 'mboxes' property. > + > +Example: > +-------- > + > + stub_clock: stub_clock { > + compatible = "hisilicon,hi6220-stub-clk"; > + hisilicon,hi6220-clk-sram = <&sram>; > + #clock-cells = <1>; > + mbox-names = "mbox-tx", "mbox-rx"; > + mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>; > + }; > -- > 1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Feb 03, 2016 at 02:47:17PM -0600, Rob Herring wrote: > On Tue, Feb 02, 2016 at 06:09:39PM +0800, Leo Yan wrote: > > Document DT binding for Hisilicon Hi6220 mailbox driver. > > > > Signed-off-by: Leo Yan <leo.yan@linaro.org> > > --- > > .../bindings/mailbox/hisilicon,hi6220-mailbox.txt | 74 ++++++++++++++++++++++ > > 1 file changed, 74 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt > > One nit, otherwise: > > Acked-by: Rob Herring <robh@kernel.org> Thanks, Rob. I will send a new version to fix them. Thanks, Leo Yan > > > > diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt > > new file mode 100644 > > index 0000000..8508c8a > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt > > @@ -0,0 +1,74 @@ > > +Hisilicon Hi6220 Mailbox Driver > > +=============================== > > + > > +Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel > > +is unidirectional with a maximum message size of 8 words. I/O is > > +performed using register access (there is no DMA) and the cell > > +raises an interrupt when messages are received. > > + > > +Mailbox Device Node: > > +==================== > > + > > +Required properties: > > +-------------------- > > +- compatible: Shall be "hisilicon,hi6220-mbox" > > +- reg: Contains the mailbox register address range (base > > + address and length); the first item is for IPC > > + registers, the second item is shared buffer for > > + slots. > > +- #mbox-cells: Common mailbox binding property to identify the number > > + of cells required for the mailbox specifier. Must be 3. > > + <&phandle slot_id dst_irq ack_irq> > > + phandle: Label name of mailbox controller > > + slot_id: Slot id used either for TX or RX > > + dst_irq: IRQ identifier index number which used by MCU > > + ack_irq: IRQ identifier index number with generating a > > + TX/RX interrupt to application processor, > > + mailbox driver uses it to acknowledge interrupt > > +- interrupts: Contains the interrupt information for the mailbox > > + device. The format is dependent on which interrupt > > + controller the SoCs use. > > + > > +Optional Properties: > > +-------------------- > > +- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver > > + use this flag to ask MCU to enable "automatic idle > > + flag" mode or IRQ generated mode to acknowledge a TX > > + completion. > > + > > +Example: > > +-------- > > + > > + mailbox: mailbox@F7510000 { > > use lowercase for hex > > > + compatible = "hisilicon,hi6220-mbox"; > > + reg = <0x0 0xF7510000 0x0 0x1000>, /* IPC_S */ > > + <0x0 0x06DFF800 0x0 0x0800>; /* Mailbox */ > > and here too. > > > + interrupt-parent = <&gic>; > > + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; > > + #mbox-cells = <3>; > > + }; > > + > > + > > +Mailbox client > > +=============== > > + > > +Required properties: > > +-------------------- > > +- compatible: Many (See the client docs). > > +- mboxes: Standard property to specify a Mailbox (See ./mailbox.txt) > > + Cells must match 'mbox-cells' (See Mailbox Device Node above). > > + > > +Optional Properties: > > +-------------------- > > +- mbox-names: Name given to channels seen in the 'mboxes' property. > > + > > +Example: > > +-------- > > + > > + stub_clock: stub_clock { > > + compatible = "hisilicon,hi6220-stub-clk"; > > + hisilicon,hi6220-clk-sram = <&sram>; > > + #clock-cells = <1>; > > + mbox-names = "mbox-tx", "mbox-rx"; > > + mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>; > > + }; > > -- > > 1.9.1 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt new file mode 100644 index 0000000..8508c8a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt @@ -0,0 +1,74 @@ +Hisilicon Hi6220 Mailbox Driver +=============================== + +Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel +is unidirectional with a maximum message size of 8 words. I/O is +performed using register access (there is no DMA) and the cell +raises an interrupt when messages are received. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "hisilicon,hi6220-mbox" +- reg: Contains the mailbox register address range (base + address and length); the first item is for IPC + registers, the second item is shared buffer for + slots. +- #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Must be 3. + <&phandle slot_id dst_irq ack_irq> + phandle: Label name of mailbox controller + slot_id: Slot id used either for TX or RX + dst_irq: IRQ identifier index number which used by MCU + ack_irq: IRQ identifier index number with generating a + TX/RX interrupt to application processor, + mailbox driver uses it to acknowledge interrupt +- interrupts: Contains the interrupt information for the mailbox + device. The format is dependent on which interrupt + controller the SoCs use. + +Optional Properties: +-------------------- +- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver + use this flag to ask MCU to enable "automatic idle + flag" mode or IRQ generated mode to acknowledge a TX + completion. + +Example: +-------- + + mailbox: mailbox@F7510000 { + compatible = "hisilicon,hi6220-mbox"; + reg = <0x0 0xF7510000 0x0 0x1000>, /* IPC_S */ + <0x0 0x06DFF800 0x0 0x0800>; /* Mailbox */ + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <3>; + }; + + +Mailbox client +=============== + +Required properties: +-------------------- +- compatible: Many (See the client docs). +- mboxes: Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Mailbox Device Node above). + +Optional Properties: +-------------------- +- mbox-names: Name given to channels seen in the 'mboxes' property. + +Example: +-------- + + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mbox-names = "mbox-tx", "mbox-rx"; + mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>; + };
Document DT binding for Hisilicon Hi6220 mailbox driver. Signed-off-by: Leo Yan <leo.yan@linaro.org> --- .../bindings/mailbox/hisilicon,hi6220-mailbox.txt | 74 ++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html