| Message ID | 1444857985-28844-4-git-send-email-al.stone@linaro.org |
|---|---|
| State | New |
| Headers | show |
On Wednesday, October 14, 2015 03:26:24 PM Al Stone wrote: > In some environments, the FADT revision number is always 2, independent > of any other factors indicating that it may be a newer revision. So, > we cannot rely on the FADT and MADT revisions being in proper sync. For > those environments, relax the checking so we only enforce the size check, > even if we do issue warnings on other problems. > > If we do not relax the rules, these systems will not boot as they have in > the past. > > Signed-off-by: Al Stone <al.stone@linaro.org> > --- > drivers/acpi/tables.c | 34 +++++++++++++++++++++++++++++----- > 1 file changed, 29 insertions(+), 5 deletions(-) > > diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c > index 3b5ddfb..790d4b0 100644 > --- a/drivers/acpi/tables.c > +++ b/drivers/acpi/tables.c > @@ -416,7 +416,6 @@ static int __init bad_madt_entry(struct acpi_table_header *table, > /* ... but relax it on legacy systems so they boot */ > pr_warn("undefined version for either FADT %d.%d or MADT %d\n", > major, minor, madt->header.revision); > - return 0; > } > } > > @@ -430,16 +429,41 @@ static int __init bad_madt_entry(struct acpi_table_header *table, > /* ... but relax it on legacy systems so they boot */ > pr_warn("undefined MADT subtable type for FADT %d.%d: %d (length %d)\n", > major, minor, entry->type, entry->length); > - return 0; > } > } > > /* verify that the table is allowed for this version of the spec */ > len = ms->lengths[entry->type]; > if (!len) { > - pr_err("MADT subtable %d not defined for FADT %d.%d\n", > - entry->type, major, minor); > - return 1; > + if (IS_ENABLED(CONFIG_ARM64)) { > + pr_err("MADT subtable %d not defined for FADT %d.%d\n", > + entry->type, major, minor); > + return 1; > + } else { > + pr_warn("MADT subtable %d not defined for FADT %d.%d\n", > + entry->type, major, minor); > + } Same comment again. > + } > + > + /* > + * When we get this far, we may have issued warnings on either > + * a mismatch in FADT/MADT revisions, or have noted that the subtable > + * ID is not defined for the MADT revision we're using. On some > + * architectures, this is an error, but for legacy systems, we need > + * to push on with other checks of the subtable. > + * > + * In fact, there are environments where the *only* value the FADT > + * revision will ever have is 2, regardless of anything else. So, > + * for those systems to boot, we have to pretend the MADT is the > + * latest version to allow all known subtables since we have no way > + * to determine what revision it should be. > + */ > + if (!IS_ENABLED(CONFIG_ARM64) && major == 2) { Gosh. No sorry, this isn't going in. Please rethink the approach. > + ms = spec_info; > + while (ms->num_types != 0) > + ms++; > + ms--; > + len = ms->lengths[entry->type]; > } > > /* verify that the length is what we expect */ > Thanks, Rafael
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index 3b5ddfb..790d4b0 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -416,7 +416,6 @@ static int __init bad_madt_entry(struct acpi_table_header *table, /* ... but relax it on legacy systems so they boot */ pr_warn("undefined version for either FADT %d.%d or MADT %d\n", major, minor, madt->header.revision); - return 0; } } @@ -430,16 +429,41 @@ static int __init bad_madt_entry(struct acpi_table_header *table, /* ... but relax it on legacy systems so they boot */ pr_warn("undefined MADT subtable type for FADT %d.%d: %d (length %d)\n", major, minor, entry->type, entry->length); - return 0; } } /* verify that the table is allowed for this version of the spec */ len = ms->lengths[entry->type]; if (!len) { - pr_err("MADT subtable %d not defined for FADT %d.%d\n", - entry->type, major, minor); - return 1; + if (IS_ENABLED(CONFIG_ARM64)) { + pr_err("MADT subtable %d not defined for FADT %d.%d\n", + entry->type, major, minor); + return 1; + } else { + pr_warn("MADT subtable %d not defined for FADT %d.%d\n", + entry->type, major, minor); + } + } + + /* + * When we get this far, we may have issued warnings on either + * a mismatch in FADT/MADT revisions, or have noted that the subtable + * ID is not defined for the MADT revision we're using. On some + * architectures, this is an error, but for legacy systems, we need + * to push on with other checks of the subtable. + * + * In fact, there are environments where the *only* value the FADT + * revision will ever have is 2, regardless of anything else. So, + * for those systems to boot, we have to pretend the MADT is the + * latest version to allow all known subtables since we have no way + * to determine what revision it should be. + */ + if (!IS_ENABLED(CONFIG_ARM64) && major == 2) { + ms = spec_info; + while (ms->num_types != 0) + ms++; + ms--; + len = ms->lengths[entry->type]; } /* verify that the length is what we expect */
In some environments, the FADT revision number is always 2, independent of any other factors indicating that it may be a newer revision. So, we cannot rely on the FADT and MADT revisions being in proper sync. For those environments, relax the checking so we only enforce the size check, even if we do issue warnings on other problems. If we do not relax the rules, these systems will not boot as they have in the past. Signed-off-by: Al Stone <al.stone@linaro.org> --- drivers/acpi/tables.c | 34 +++++++++++++++++++++++++++++----- 1 file changed, 29 insertions(+), 5 deletions(-)