| Message ID | 1444771347-11382-2-git-send-email-jonmason@broadcom.com |
|---|---|
| State | Superseded |
| Headers | show |
Shouldn't the device tree binding document go with the other patch series since both the binding document and drivers are merged by Michael or Stephen? On 10/13/2015 2:22 PM, Jon Mason wrote: > Document the device tree bindings for Broadcom Northstar Plus > architecture based clock controller > > Signed-off-by: Jon Mason <jonmason@broadcom.com> > --- > .../bindings/clock/brcm,iproc-clocks.txt | 30 ++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt > index da8d9bb..b3c3e9d 100644 > --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt > +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt > @@ -130,3 +130,33 @@ These clock IDs are defined in: > ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED > ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED > ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED > + > +Northstar and Northstar Plus > +------ > +PLL and leaf clock compatible strings for Northstar and Northstar Plus are: > + "brcm,nsp-armpll" > + "brcm,nsp-genpll" > + "brcm,nsp-lcpll0" So the current clock driver also supports NS? That will be nice and that indicates all the clock related registers/offsets are exactly the same between NS and NSP? > + > +The following table defines the set of PLL/clock index and ID for Northstar and > +Northstar Plus. These clock IDs are defined in: > + "include/dt-bindings/clock/bcm-nsp.h" > + > + Clock Source Index ID > + --- ----- ----- --------- > + crystal N/A N/A N/A > + > + armpll crystal N/A N/A > + > + genpll crystal 0 BCM_NSP_GENPLL > + phy genpll 1 BCM_NSP_GENPLL_PHY_CLK > + ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK > + usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK > + iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK > + sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK > + sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK > + > + lcpll0 crystal 0 BCM_NSP_LCPLL0 > + pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK > + sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK > + ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Oct 13, 2015 at 03:17:36PM -0700, Ray Jui wrote: > Shouldn't the device tree binding document go with the other patch > series since both the binding document and drivers are merged by Michael > or Stephen? > > On 10/13/2015 2:22 PM, Jon Mason wrote: > > Document the device tree bindings for Broadcom Northstar Plus > > architecture based clock controller > > > > Signed-off-by: Jon Mason <jonmason@broadcom.com> > > --- > > .../bindings/clock/brcm,iproc-clocks.txt | 30 ++++++++++++++++++++++ > > 1 file changed, 30 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt > > index da8d9bb..b3c3e9d 100644 > > --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt > > +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt > > @@ -130,3 +130,33 @@ These clock IDs are defined in: > > ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED > > ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED > > ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED > > + > > +Northstar and Northstar Plus > > +------ > > +PLL and leaf clock compatible strings for Northstar and Northstar Plus are: > > + "brcm,nsp-armpll" > > + "brcm,nsp-genpll" > > + "brcm,nsp-lcpll0" > > So the current clock driver also supports NS? That will be nice and that > indicates all the clock related registers/offsets are exactly the same > between NS and NSP? Yes. The register offsets are different, but everything else is identical. > > > + > > +The following table defines the set of PLL/clock index and ID for Northstar and > > +Northstar Plus. These clock IDs are defined in: > > + "include/dt-bindings/clock/bcm-nsp.h" > > + > > + Clock Source Index ID > > + --- ----- ----- --------- > > + crystal N/A N/A N/A > > + > > + armpll crystal N/A N/A > > + > > + genpll crystal 0 BCM_NSP_GENPLL > > + phy genpll 1 BCM_NSP_GENPLL_PHY_CLK > > + ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK > > + usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK > > + iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK > > + sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK > > + sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK > > + > > + lcpll0 crystal 0 BCM_NSP_LCPLL0 > > + pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK > > + sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK > > + ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt index da8d9bb..b3c3e9d 100644 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -130,3 +130,33 @@ These clock IDs are defined in: ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED + +Northstar and Northstar Plus +------ +PLL and leaf clock compatible strings for Northstar and Northstar Plus are: + "brcm,nsp-armpll" + "brcm,nsp-genpll" + "brcm,nsp-lcpll0" + +The following table defines the set of PLL/clock index and ID for Northstar and +Northstar Plus. These clock IDs are defined in: + "include/dt-bindings/clock/bcm-nsp.h" + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + genpll crystal 0 BCM_NSP_GENPLL + phy genpll 1 BCM_NSP_GENPLL_PHY_CLK + ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK + usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK + iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK + sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK + sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK + + lcpll0 crystal 0 BCM_NSP_LCPLL0 + pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK + sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK + ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK
Document the device tree bindings for Broadcom Northstar Plus architecture based clock controller Signed-off-by: Jon Mason <jonmason@broadcom.com> --- .../bindings/clock/brcm,iproc-clocks.txt | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+)