[V3,2/2] USB: OHCI: make ohci-pxa27x a separate driver

Message ID	1374850157-5854-3-git-send-email-manjunath.goudar@linaro.org
State	Accepted
Commit	b8ad5c370640886792487be7835810f204388c95
Headers	show Return-Path: <patchwork-forward+bncBDLJBGWCT4CRBA4ZZKHQKGQEWSVFOYA@linaro.org> MIME-Version: 1.0 Received-SPF: neutral (google.com: 209.85.128.181 is neither permitted nor denied by best guess record for domain of patch+caf_=patchwork-forward=linaro.org@linaro.org) client-ip=209.85.128.181; Received-SPF: neutral (google.com: 209.85.160.53 is neither permitted nor denied by best guess record for domain of manjunath.goudar@linaro.org) client-ip=209.85.160.53; From: Manjunath Goudar <manjunath.goudar@linaro.org> To: linux-usb@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, patches@linaro.org, stern@rowland.harvard.edu, arnd@linaro.org, manjunath.goudar@linaro.org, linaro-kernel@lists.linaro.org, Arnd Bergmann <arnd@arndb.de>, Greg KH <greg@kroah.com> Subject: [PATCH V3 2/2] USB: OHCI: make ohci-pxa27x a separate driver Date: Fri, 26 Jul 2013 20:19:17 +0530 Message-Id: <1374850157-5854-3-git-send-email-manjunath.goudar@linaro.org> In-Reply-To: <1374850157-5854-1-git-send-email-manjunath.goudar@linaro.org> References: <1372958187-4039-1-git-send-email-manjunath.goudar@linaro.org> <1374850157-5854-1-git-send-email-manjunath.goudar@linaro.org> Precedence: list Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index cdfaa04..0d7ee36 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -422,6 +422,14 @@ config USB_OHCI_HCD_EP93XX Enables support for the on-chip OHCI controller on EP93XX chips. +config USB_OHCI_HCD_PXA27X + tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller" + depends on USB_OHCI_HCD && (PXA27x || PXA3xx) + default y + ---help--- + Enables support for the on-chip OHCI controller on + PXA27x/PXA3xx chips. + config USB_OHCI_HCD_AT91 tristate "Support for Atmel on-chip OHCI USB controller" depends on USB_OHCI_HCD && ARCH_AT91 diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 3fee3ea..8b7fa89 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_USB_OHCI_HCD_S3CXXXX) += ohci-s3c2410.o obj-$(CONFIG_USB_OHCI_HCD_LPC32XX) += ohci-nxp.o obj-$(CONFIG_USB_OHCI_HCD_DA8XX) += ohci-da8xx.o obj-$(CONFIG_USB_OHCI_HCD_EP93XX) += ohci-ep93xx.o +obj-$(CONFIG_USB_OHCI_HCD_PXA27X) += ohci-pxa27x.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_FHCI_HCD) += fhci.o diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 3f46cff..f601dde 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1184,11 +1184,6 @@ MODULE_LICENSE ("GPL"); #define SA1111_DRIVER ohci_hcd_sa1111_driver #endif -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) -#include "ohci-pxa27x.c" -#define PLATFORM_DRIVER ohci_hcd_pxa27x_driver -#endif - #ifdef CONFIG_USB_OHCI_HCD_PPC_OF #include "ohci-ppc-of.c" #define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 5fb91f1..394f221 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -19,15 +19,26 @@ * This file is licenced under the GPL. */ -#include <linux/device.h> -#include <linux/signal.h> -#include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> #include <linux/of_platform.h> #include <linux/of_gpio.h> -#include <mach/hardware.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/usb-pxa3xx-ulpi.h> +#include <linux/platform_device.h> +#include <linux/signal.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/usb/otg.h> + +#include <mach/hardware.h> + +#include "ohci.h" + +#define DRIVER_DESC "OHCI PXA27x/PXA3x driver" /* * UHC: USB Host Controller (OHCI-like) register definitions @@ -101,16 +112,16 @@ #define PXA_UHC_MAX_PORTNUM 3 -struct pxa27x_ohci { - /* must be 1st member here for hcd_to_ohci() to work */ - struct ohci_hcd ohci; +static const char hcd_name[] = "ohci-pxa27x"; + +static struct hc_driver __read_mostly ohci_pxa27x_hc_driver; - struct device *dev; +struct pxa27x_ohci { struct clk *clk; void __iomem *mmio_base; }; -#define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)hcd_to_ohci(hcd) +#define to_pxa27x_ohci(hcd) (struct pxa27x_ohci *)(hcd_to_ohci(hcd)->priv) /* PMM_NPS_MODE -- PMM Non-power switching mode @@ -122,10 +133,10 @@ struct pxa27x_ohci { PMM_PERPORT_MODE -- PMM per port switching mode Ports are powered individually. */ -static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode) +static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *pxa_ohci, int mode) { - uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA); - uint32_t uhcrhdb = __raw_readl(ohci->mmio_base + UHCRHDB); + uint32_t uhcrhda = __raw_readl(pxa_ohci->mmio_base + UHCRHDA); + uint32_t uhcrhdb = __raw_readl(pxa_ohci->mmio_base + UHCRHDB); switch (mode) { case PMM_NPS_MODE: @@ -149,20 +160,18 @@ static int pxa27x_ohci_select_pmm(struct pxa27x_ohci *ohci, int mode) uhcrhda |= RH_A_NPS; } - __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA); - __raw_writel(uhcrhdb, ohci->mmio_base + UHCRHDB); + __raw_writel(uhcrhda, pxa_ohci->mmio_base + UHCRHDA); + __raw_writel(uhcrhdb, pxa_ohci->mmio_base + UHCRHDB); return 0; } -extern int usb_disabled(void); - /*-------------------------------------------------------------------------*/ -static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci, +static inline void pxa27x_setup_hc(struct pxa27x_ohci *pxa_ohci, struct pxaohci_platform_data *inf) { - uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR); - uint32_t uhcrhda = __raw_readl(ohci->mmio_base + UHCRHDA); + uint32_t uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR); + uint32_t uhcrhda = __raw_readl(pxa_ohci->mmio_base + UHCRHDA); if (inf->flags & ENABLE_PORT1) uhchr &= ~UHCHR_SSEP1; @@ -194,17 +203,17 @@ static inline void pxa27x_setup_hc(struct pxa27x_ohci *ohci, uhcrhda |= UHCRHDA_POTPGT(inf->power_on_delay / 2); } - __raw_writel(uhchr, ohci->mmio_base + UHCHR); - __raw_writel(uhcrhda, ohci->mmio_base + UHCRHDA); + __raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR); + __raw_writel(uhcrhda, pxa_ohci->mmio_base + UHCRHDA); } -static inline void pxa27x_reset_hc(struct pxa27x_ohci *ohci) +static inline void pxa27x_reset_hc(struct pxa27x_ohci *pxa_ohci) { - uint32_t uhchr = __raw_readl(ohci->mmio_base + UHCHR); + uint32_t uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR); - __raw_writel(uhchr | UHCHR_FHR, ohci->mmio_base + UHCHR); + __raw_writel(uhchr | UHCHR_FHR, pxa_ohci->mmio_base + UHCHR); udelay(11); - __raw_writel(uhchr & ~UHCHR_FHR, ohci->mmio_base + UHCHR); + __raw_writel(uhchr & ~UHCHR_FHR, pxa_ohci->mmio_base + UHCHR); } #ifdef CONFIG_PXA27x @@ -213,25 +222,26 @@ extern void pxa27x_clear_otgph(void); #define pxa27x_clear_otgph() do {} while (0) #endif -static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev) +static int pxa27x_start_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev) { int retval = 0; struct pxaohci_platform_data *inf; uint32_t uhchr; + struct usb_hcd *hcd = dev_get_drvdata(dev); inf = dev->platform_data; - clk_prepare_enable(ohci->clk); + clk_prepare_enable(pxa_ohci->clk); - pxa27x_reset_hc(ohci); + pxa27x_reset_hc(pxa_ohci); - uhchr = __raw_readl(ohci->mmio_base + UHCHR) | UHCHR_FSBIR; - __raw_writel(uhchr, ohci->mmio_base + UHCHR); + uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR) | UHCHR_FSBIR; + __raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR); - while (__raw_readl(ohci->mmio_base + UHCHR) & UHCHR_FSBIR) + while (__raw_readl(pxa_ohci->mmio_base + UHCHR) & UHCHR_FSBIR) cpu_relax(); - pxa27x_setup_hc(ohci, inf); + pxa27x_setup_hc(pxa_ohci, inf); if (inf->init) retval = inf->init(dev); @@ -240,38 +250,39 @@ static int pxa27x_start_hc(struct pxa27x_ohci *ohci, struct device *dev) return retval; if (cpu_is_pxa3xx()) - pxa3xx_u2d_start_hc(&ohci_to_hcd(&ohci->ohci)->self); + pxa3xx_u2d_start_hc(&hcd->self); - uhchr = __raw_readl(ohci->mmio_base + UHCHR) & ~UHCHR_SSE; - __raw_writel(uhchr, ohci->mmio_base + UHCHR); - __raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, ohci->mmio_base + UHCHIE); + uhchr = __raw_readl(pxa_ohci->mmio_base + UHCHR) & ~UHCHR_SSE; + __raw_writel(uhchr, pxa_ohci->mmio_base + UHCHR); + __raw_writel(UHCHIE_UPRIE | UHCHIE_RWIE, pxa_ohci->mmio_base + UHCHIE); /* Clear any OTG Pin Hold */ pxa27x_clear_otgph(); return 0; } -static void pxa27x_stop_hc(struct pxa27x_ohci *ohci, struct device *dev) +static void pxa27x_stop_hc(struct pxa27x_ohci *pxa_ohci, struct device *dev) { struct pxaohci_platform_data *inf; + struct usb_hcd *hcd = dev_get_drvdata(dev); uint32_t uhccoms; inf = dev->platform_data; if (cpu_is_pxa3xx()) - pxa3xx_u2d_stop_hc(&ohci_to_hcd(&ohci->ohci)->self); + pxa3xx_u2d_stop_hc(&hcd->self); if (inf->exit) inf->exit(dev); - pxa27x_reset_hc(ohci); + pxa27x_reset_hc(pxa_ohci); /* Host Controller Reset */ - uhccoms = __raw_readl(ohci->mmio_base + UHCCOMS) | 0x01; - __raw_writel(uhccoms, ohci->mmio_base + UHCCOMS); + uhccoms = __raw_readl(pxa_ohci->mmio_base + UHCCOMS) | 0x01; + __raw_writel(uhccoms, pxa_ohci->mmio_base + UHCCOMS); udelay(10); - clk_disable_unprepare(ohci->clk); + clk_disable_unprepare(pxa_ohci->clk); } #ifdef CONFIG_OF @@ -356,7 +367,8 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device int retval, irq; struct usb_hcd *hcd; struct pxaohci_platform_data *inf; - struct pxa27x_ohci *ohci; + struct pxa27x_ohci *pxa_ohci; + struct ohci_hcd *ohci; struct resource *r; struct clk *usb_clk; @@ -409,29 +421,31 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device } /* initialize "struct pxa27x_ohci" */ - ohci = (struct pxa27x_ohci *)hcd_to_ohci(hcd); - ohci->dev = &pdev->dev; - ohci->clk = usb_clk; - ohci->mmio_base = (void __iomem *)hcd->regs; + pxa_ohci = to_pxa27x_ohci(hcd); + pxa_ohci->clk = usb_clk; + pxa_ohci->mmio_base = (void __iomem *)hcd->regs; - if ((retval = pxa27x_start_hc(ohci, &pdev->dev)) < 0) { + retval = pxa27x_start_hc(pxa_ohci, &pdev->dev); + if (retval < 0) { pr_debug("pxa27x_start_hc failed"); goto err3; } /* Select Power Management Mode */ - pxa27x_ohci_select_pmm(ohci, inf->port_mode); + pxa27x_ohci_select_pmm(pxa_ohci, inf->port_mode); if (inf->power_budget) hcd->power_budget = inf->power_budget; - ohci_hcd_init(hcd_to_ohci(hcd)); + /* The value of NDP in roothub_a is incorrect on this hardware */ + ohci = hcd_to_ohci(hcd); + ohci->num_ports = 3; retval = usb_add_hcd(hcd, irq, 0); if (retval == 0) return retval; - pxa27x_stop_hc(ohci, &pdev->dev); + pxa27x_stop_hc(pxa_ohci, &pdev->dev); err3: iounmap(hcd->regs); err2: @@ -459,88 +473,18 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device */ void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev) { - struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd); usb_remove_hcd(hcd); - pxa27x_stop_hc(ohci, &pdev->dev); + pxa27x_stop_hc(pxa_ohci, &pdev->dev); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + clk_put(pxa_ohci->clk); usb_put_hcd(hcd); - clk_put(ohci->clk); -} - -/*-------------------------------------------------------------------------*/ - -static int -ohci_pxa27x_start (struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci); - - /* The value of NDP in roothub_a is incorrect on this hardware */ - ohci->num_ports = 3; - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run (ohci)) < 0) { - dev_err(hcd->self.controller, "can't start %s", - hcd->self.bus_name); - ohci_stop (hcd); - return ret; - } - - return 0; } /*-------------------------------------------------------------------------*/ -static const struct hc_driver ohci_pxa27x_hc_driver = { - .description = hcd_name, - .product_desc = "PXA27x OHCI", - .hcd_priv_size = sizeof(struct pxa27x_ohci), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_pxa27x_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev) { pr_debug ("In ohci_hcd_pxa27x_drv_probe"); @@ -563,38 +507,43 @@ static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev) static int ohci_hcd_pxa27x_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd); bool do_wakeup = device_may_wakeup(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); int ret; - if (time_before(jiffies, ohci->ohci.next_statechange)) + if (time_before(jiffies, ohci->next_statechange)) msleep(5); - ohci->ohci.next_statechange = jiffies; + + ohci->next_statechange = jiffies; ret = ohci_suspend(hcd, do_wakeup); if (ret) return ret; - pxa27x_stop_hc(ohci, dev); + pxa27x_stop_hc(pxa_ohci, dev); return ret; } static int ohci_hcd_pxa27x_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd); + struct pxa27x_ohci *pxa_ohci = to_pxa27x_ohci(hcd); struct pxaohci_platform_data *inf = dev->platform_data; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); int status; - if (time_before(jiffies, ohci->ohci.next_statechange)) + if (time_before(jiffies, ohci->next_statechange)) msleep(5); - ohci->ohci.next_statechange = jiffies; - if ((status = pxa27x_start_hc(ohci, dev)) < 0) + ohci->next_statechange = jiffies; + + status = pxa27x_start_hc(pxa_ohci, dev); + if (status < 0) return status; /* Select Power Management Mode */ - pxa27x_ohci_select_pmm(ohci, inf->port_mode); + pxa27x_ohci_select_pmm(pxa_ohci, inf->port_mode); ohci_resume(hcd, false); return 0; @@ -606,9 +555,6 @@ static const struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = { }; #endif -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:pxa27x-ohci"); - static struct platform_driver ohci_hcd_pxa27x_driver = { .probe = ohci_hcd_pxa27x_drv_probe, .remove = ohci_hcd_pxa27x_drv_remove, @@ -623,3 +569,27 @@ static struct platform_driver ohci_hcd_pxa27x_driver = { }, }; +static const struct ohci_driver_overrides pxa27x_overrides __initconst = { + .extra_priv_size = sizeof(struct pxa27x_ohci), +}; + +static int __init ohci_pxa27x_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + ohci_init_driver(&ohci_pxa27x_hc_driver, &pxa27x_overrides); + return platform_driver_register(&ohci_hcd_pxa27x_driver); +} +module_init(ohci_pxa27x_init); + +static void __exit ohci_pxa27x_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_pxa27x_driver); +} +module_exit(ohci_pxa27x_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa27x-ohci");

[V3,2/2] USB: OHCI: make ohci-pxa27x a separate driver

Commit Message

Comments

Patch