diff mbox

[v1,3/8] mfd: intel_quark_i2c_gpio: load gpio driver first

Message ID 20150922222340.GC9317@x1
State New
Headers show

Commit Message

Lee Jones Sept. 22, 2015, 10:23 p.m. UTC 
On Tue, 22 Sep 2015, Andy Shevchenko wrote:

> On Intel Galileo boards the GPIO expander is connected to i2c bus. Moreover it
> is able to generate interrupt, but interrupt line is connected to GPIO. That's
> why we have to have GPIO driver in place when we will probe i2c host with
> device connected to it.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/mfd/intel_quark_i2c_gpio.c | 48 +++++++++++++++++++++-----------------
>  1 file changed, 27 insertions(+), 21 deletions(-)


?

> diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
> index 1ce1603..89bd4bf 100644
> --- a/drivers/mfd/intel_quark_i2c_gpio.c
> +++ b/drivers/mfd/intel_quark_i2c_gpio.c
> @@ -82,27 +82,26 @@ static struct resource intel_quark_i2c_res[] = {
>  	},
>  };
>  
> +static struct mfd_cell intel_quark_mfd_i2c_cell = {
> +	.id = MFD_I2C_BAR,
> +	.name = "i2c_designware",
> +	.num_resources = ARRAY_SIZE(intel_quark_i2c_res),
> +	.resources = intel_quark_i2c_res,
> +	.ignore_resource_conflicts = true,
> +};
> +
>  static struct resource intel_quark_gpio_res[] = {
>  	[INTEL_QUARK_IORES_MEM] = {
>  		.flags = IORESOURCE_MEM,
>  	},
>  };
>  
> -static struct mfd_cell intel_quark_mfd_cells[] = {
> -	{
> -		.id = MFD_I2C_BAR,
> -		.name = "i2c_designware",
> -		.num_resources = ARRAY_SIZE(intel_quark_i2c_res),
> -		.resources = intel_quark_i2c_res,
> -		.ignore_resource_conflicts = true,
> -	},
> -	{
> -		.id = MFD_GPIO_BAR,
> -		.name = "gpio-dwapb",
> -		.num_resources = ARRAY_SIZE(intel_quark_gpio_res),
> -		.resources = intel_quark_gpio_res,
> -		.ignore_resource_conflicts = true,
> -	},
> +static struct mfd_cell intel_quark_mfd_gpio_cell = {
> +	.id = MFD_GPIO_BAR,
> +	.name = "gpio-dwapb",
> +	.num_resources = ARRAY_SIZE(intel_quark_gpio_res),
> +	.resources = intel_quark_gpio_res,
> +	.ignore_resource_conflicts = true,
>  };
>  
>  static const struct pci_device_id intel_quark_mfd_ids[] = {
> @@ -248,18 +247,25 @@ static int intel_quark_mfd_probe(struct pci_dev *pdev,
>  
>  	dev_set_drvdata(&pdev->dev, quark_mfd);
>  
> -	ret = intel_quark_i2c_setup(pdev, &intel_quark_mfd_cells[MFD_I2C_BAR]);
> +	ret = intel_quark_i2c_setup(pdev, &intel_quark_mfd_i2c_cell);
>  	if (ret)
>  		return ret;
>  
> -	ret = intel_quark_gpio_setup(pdev,
> -				     &intel_quark_mfd_cells[MFD_GPIO_BAR]);
> +	ret = intel_quark_gpio_setup(pdev, &intel_quark_mfd_gpio_cell);
>  	if (ret)
>  		return ret;
>  
> -	return mfd_add_devices(&pdev->dev, 0, intel_quark_mfd_cells,
> -			       ARRAY_SIZE(intel_quark_mfd_cells), NULL, 0,
> -			       NULL);
> +	ret = mfd_add_devices(&pdev->dev, 0, &intel_quark_mfd_gpio_cell, 1,
> +			      NULL, 0, NULL);
> +	if (ret)
> +		return ret;
> +
> +	ret = mfd_add_devices(&pdev->dev, 0, &intel_quark_mfd_i2c_cell, 1,
> +			      NULL, 0, NULL);
> +	if (ret)
> +		mfd_remove_devices(&pdev->dev);
> +
> +	return ret;
>  }
>  
>  static void intel_quark_mfd_remove(struct pci_dev *pdev)

Comments

Andy Shevchenko Sept. 23, 2015, 7:53 a.m. UTC | #1 
On Tue, 2015-09-22 at 23:23 +0100, Lee Jones wrote:
> On Tue, 22 Sep 2015, Andy Shevchenko wrote:
> 
> > On Intel Galileo boards the GPIO expander is connected to i2c bus. 
> > Moreover it
> > is able to generate interrupt, but interrupt line is connected to 
> > GPIO. That's
> > why we have to have GPIO driver in place when we will probe i2c 
> > host with
> > device connected to it.
> > 
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
> >  drivers/mfd/intel_quark_i2c_gpio.c | 48 +++++++++++++++++++++-----
> > ------------
> >  1 file changed, 27 insertions(+), 21 deletions(-)
> 
> --- a/drivers/mfd/intel_quark_i2c_gpio.c
> +++ b/drivers/mfd/intel_quark_i2c_gpio.c
> @@ -28,8 +28,8 @@
>  #include <linux/platform_data/i2c-designware.h>
>  
>  /* PCI BAR for register base address */
> -#define MFD_I2C_BAR            0
> -#define MFD_GPIO_BAR           1
> +#define MFD_GPIO_BAR           0
> +#define MFD_I2C_BAR            1
>  
>  /* The base GPIO number under GPIOLIB framework */
>  #define INTEL_QUARK_MFD_GPIO_BASE      8
> 
> ?

No, PCI bars are left without changes, but _ADR values are different.
Otherwise it will not work.

Here is the excerpt from DSDT
    Device (GIP0)
    {   
        Name (_ADR, 0x00150002)  // _ADR: Address
        Name (_STA, 0x0F)  // _STA: Status
        Name (_PRW, Package (0x02)  // _PRW: Power Resources for Wake
          {   
              0x0F, 
              0x03
          })
        Device (GPO)
        {   
          Name (_ADR, Zero)  // _ADR: Address
          Name (_STA, 0x0F)  // _STA: Status
          Name (_PRW, Package (0x02)  // _PRW: Power Resources for Wake
            {   
                0x0F, 
                0x03
            })
        }

        Device (I2C)
        {   
          Name (_ADR, One)  // _ADR: Address
          Name (_STA, 0x0F)  // _STA: Status
          Name (_PRW, Package (0x02)  // _PRW: Power Resources for Wake
            {   
                0x0F, 
                0x03
            })
        }
    }

> 
> > diff --git a/drivers/mfd/intel_quark_i2c_gpio.c 
> > b/drivers/mfd/intel_quark_i2c_gpio.c
> > index 1ce1603..89bd4bf 100644
> > --- a/drivers/mfd/intel_quark_i2c_gpio.c
> > +++ b/drivers/mfd/intel_quark_i2c_gpio.c
> > @@ -82,27 +82,26 @@ static struct resource intel_quark_i2c_res[] = 
> > {
> >  	},
> >  };
> >  
> > +static struct mfd_cell intel_quark_mfd_i2c_cell = {
> > +	.id = MFD_I2C_BAR,
> > +	.name = "i2c_designware",
> > +	.num_resources = ARRAY_SIZE(intel_quark_i2c_res),
> > +	.resources = intel_quark_i2c_res,
> > +	.ignore_resource_conflicts = true,
> > +};
> > +
> >  static struct resource intel_quark_gpio_res[] = {
> >  	[INTEL_QUARK_IORES_MEM] = {
> >  		.flags = IORESOURCE_MEM,
> >  	},
> >  };
> >  
> > -static struct mfd_cell intel_quark_mfd_cells[] = {
> > -	{
> > -		.id = MFD_I2C_BAR,
> > -		.name = "i2c_designware",
> > -		.num_resources = ARRAY_SIZE(intel_quark_i2c_res),
> > -		.resources = intel_quark_i2c_res,
> > -		.ignore_resource_conflicts = true,
> > -	},
> > -	{
> > -		.id = MFD_GPIO_BAR,
> > -		.name = "gpio-dwapb",
> > -		.num_resources = ARRAY_SIZE(intel_quark_gpio_res),
> > -		.resources = intel_quark_gpio_res,
> > -		.ignore_resource_conflicts = true,
> > -	},
> > +static struct mfd_cell intel_quark_mfd_gpio_cell = {
> > +	.id = MFD_GPIO_BAR,
> > +	.name = "gpio-dwapb",
> > +	.num_resources = ARRAY_SIZE(intel_quark_gpio_res),
> > +	.resources = intel_quark_gpio_res,
> > +	.ignore_resource_conflicts = true,
> >  };
> >  
> >  static const struct pci_device_id intel_quark_mfd_ids[] = {
> > @@ -248,18 +247,25 @@ static int intel_quark_mfd_probe(struct 
> > pci_dev *pdev,
> >  
> >  	dev_set_drvdata(&pdev->dev, quark_mfd);
> >  
> > -	ret = intel_quark_i2c_setup(pdev, 
> > &intel_quark_mfd_cells[MFD_I2C_BAR]);
> > +	ret = intel_quark_i2c_setup(pdev, 
> > &intel_quark_mfd_i2c_cell);
> >  	if (ret)
> >  		return ret;
> >  
> > -	ret = intel_quark_gpio_setup(pdev,
> > -				    
> >  &intel_quark_mfd_cells[MFD_GPIO_BAR]);
> > +	ret = intel_quark_gpio_setup(pdev, 
> > &intel_quark_mfd_gpio_cell);
> >  	if (ret)
> >  		return ret;
> >  
> > -	return mfd_add_devices(&pdev->dev, 0, 
> > intel_quark_mfd_cells,
> > -			       ARRAY_SIZE(intel_quark_mfd_cells), 
> > NULL, 0,
> > -			       NULL);
> > +	ret = mfd_add_devices(&pdev->dev, 0, 
> > &intel_quark_mfd_gpio_cell, 1,
> > +			      NULL, 0, NULL);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = mfd_add_devices(&pdev->dev, 0, 
> > &intel_quark_mfd_i2c_cell, 1,
> > +			      NULL, 0, NULL);
> > +	if (ret)
> > +		mfd_remove_devices(&pdev->dev);
> > +
> > +	return ret;
> >  }
> >  
> >  static void intel_quark_mfd_remove(struct pci_dev *pdev)
>
diff mbox

Patch

--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -28,8 +28,8 @@ 
 #include <linux/platform_data/i2c-designware.h>
 
 /* PCI BAR for register base address */
-#define MFD_I2C_BAR            0
-#define MFD_GPIO_BAR           1
+#define MFD_GPIO_BAR           0
+#define MFD_I2C_BAR            1
 
 /* The base GPIO number under GPIOLIB framework */
 #define INTEL_QUARK_MFD_GPIO_BASE      8