| Message ID | 1410295035-14471-1-git-send-email-suravee.suthikulpanit@amd.com |
|---|---|
| State | New |
| Headers | show |
Hi, On 09/09/2014 10:37 PM, suravee.suthikulpanit@amd.com wrote: > From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> > > This patch adds ACPI support for non-PCI SATA contoller in ahci_platform driver. > It adds ACPI matching table in ahci_platform to support AMD Seattle SATA controller > with following ASL structure in DSDT: > > Device (SATA0) > { > Name(_HID, "AMDI0600") // Seattle AHSATA > Name (_CCA, 1) // Cache-coherent controller > Name (_CRS, ResourceTemplate () > { > Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000) > Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 } > }) > } > > Since ATA driver should not require PCI support for ATA_ACPI, > this patch also removes dependency in the driver/ata/Kconfig. > > Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Looks good to me, one small nitpick inline. Acked-by: Hans de Goede <hdegoede@redhat.com> > --- > drivers/ata/Kconfig | 2 +- > drivers/ata/ahci_platform.c | 13 +++++++++++++ > 2 files changed, 14 insertions(+), 1 deletion(-) > > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig > index e1b9278..f2e6c9e 100644 > --- a/drivers/ata/Kconfig > +++ b/drivers/ata/Kconfig > @@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR > > config ATA_ACPI > bool "ATA ACPI Support" > - depends on ACPI && PCI > + depends on ACPI > default y > help > This option adds support for ATA-related ACPI objects. > diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c > index f61ddb9..3499bab 100644 > --- a/drivers/ata/ahci_platform.c > +++ b/drivers/ata/ahci_platform.c > @@ -20,6 +20,9 @@ > #include <linux/platform_device.h> > #include <linux/libata.h> > #include <linux/ahci_platform.h> > +#ifdef CONFIG_ATA_ACPI > +#include <linux/acpi.h> > +#endif > #include "ahci.h" > > static const struct ata_port_info ahci_port_info = { > @@ -87,6 +90,13 @@ static const struct of_device_id ahci_of_match[] = { > }; > MODULE_DEVICE_TABLE(of, ahci_of_match); > > +#ifdef CONFIG_ATA_ACPI > +static const struct acpi_device_id ahci_acpi_match[] = { > + { "AMDI0600", 0 }, /* AMD Seattle AHCI */ > + { }, > +}; > +#endif > + > static struct platform_driver ahci_driver = { > .probe = ahci_probe, > .remove = ata_platform_remove_one, > @@ -94,6 +104,9 @@ static struct platform_driver ahci_driver = { > .name = "ahci", > .owner = THIS_MODULE, > .of_match_table = ahci_of_match, > +#ifdef CONFIG_ATA_ACPI > + .acpi_match_table = ACPI_PTR(ahci_acpi_match), > +#endif Hmm, is the cast here really necessary ? AFAIK nowadays we usually don't need this cast macros, and they can hide accidental prototype differences, so they are better avoided. > .pm = &ahci_pm_ops, > }, > }; > Regards, Hans -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Sep 9, 2014 at 1:37 PM, <suravee.suthikulpanit@amd.com> wrote: > From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> > > This patch adds ACPI support for non-PCI SATA contoller in ahci_platform driver. > It adds ACPI matching table in ahci_platform to support AMD Seattle SATA controller > with following ASL structure in DSDT: > > Device (SATA0) > { > Name(_HID, "AMDI0600") // Seattle AHSATA > Name (_CCA, 1) // Cache-coherent controller > Name (_CRS, ResourceTemplate () > { > Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000) > Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 } > }) > } > > Since ATA driver should not require PCI support for ATA_ACPI, > this patch also removes dependency in the driver/ata/Kconfig. > > Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> > --- > drivers/ata/Kconfig | 2 +- > drivers/ata/ahci_platform.c | 13 +++++++++++++ > 2 files changed, 14 insertions(+), 1 deletion(-) > > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig > index e1b9278..f2e6c9e 100644 > --- a/drivers/ata/Kconfig > +++ b/drivers/ata/Kconfig > @@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR > > config ATA_ACPI > bool "ATA ACPI Support" > - depends on ACPI && PCI > + depends on ACPI > default y > help > This option adds support for ATA-related ACPI objects. > diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c > index f61ddb9..3499bab 100644 > --- a/drivers/ata/ahci_platform.c > +++ b/drivers/ata/ahci_platform.c > @@ -20,6 +20,9 @@ > #include <linux/platform_device.h> > #include <linux/libata.h> > #include <linux/ahci_platform.h> > +#ifdef CONFIG_ATA_ACPI > +#include <linux/acpi.h> > +#endif > #include "ahci.h" > > static const struct ata_port_info ahci_port_info = { > @@ -87,6 +90,13 @@ static const struct of_device_id ahci_of_match[] = { > }; > MODULE_DEVICE_TABLE(of, ahci_of_match); > > +#ifdef CONFIG_ATA_ACPI > +static const struct acpi_device_id ahci_acpi_match[] = { > + { "AMDI0600", 0 }, /* AMD Seattle AHCI */ > + { }, > +}; > +#endif > + > static struct platform_driver ahci_driver = { > .probe = ahci_probe, > .remove = ata_platform_remove_one, > @@ -94,6 +104,9 @@ static struct platform_driver ahci_driver = { > .name = "ahci", > .owner = THIS_MODULE, > .of_match_table = ahci_of_match, > +#ifdef CONFIG_ATA_ACPI > + .acpi_match_table = ACPI_PTR(ahci_acpi_match), > +#endif The whole point of having ACPI_PTR() is to avoid having ifdefs like these. The structure member is always there, so there's no need to have it conditionally compiled out. Come to think of it, the match table should be under CONFIG_ACPI instead -- why do a separate config option just for this? -Olof -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 09/11/2014 10:17 PM, Olof Johansson wrote: > On Tue, Sep 9, 2014 at 1:37 PM, <suravee.suthikulpanit@amd.com> wrote: >> From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> >> >> This patch adds ACPI support for non-PCI SATA contoller in ahci_platform driver. >> It adds ACPI matching table in ahci_platform to support AMD Seattle SATA controller >> with following ASL structure in DSDT: >> >> Device (SATA0) >> { >> Name(_HID, "AMDI0600") // Seattle AHSATA >> Name (_CCA, 1) // Cache-coherent controller >> Name (_CRS, ResourceTemplate () >> { >> Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000) >> Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 } >> }) >> } >> >> Since ATA driver should not require PCI support for ATA_ACPI, >> this patch also removes dependency in the driver/ata/Kconfig. >> >> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> >> --- >> drivers/ata/Kconfig | 2 +- >> drivers/ata/ahci_platform.c | 13 +++++++++++++ >> 2 files changed, 14 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig >> index e1b9278..f2e6c9e 100644 >> --- a/drivers/ata/Kconfig >> +++ b/drivers/ata/Kconfig >> @@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR >> >> config ATA_ACPI >> bool "ATA ACPI Support" >> - depends on ACPI && PCI >> + depends on ACPI >> default y >> help >> This option adds support for ATA-related ACPI objects. >> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c >> index f61ddb9..3499bab 100644 >> --- a/drivers/ata/ahci_platform.c >> +++ b/drivers/ata/ahci_platform.c >> @@ -20,6 +20,9 @@ >> #include <linux/platform_device.h> >> #include <linux/libata.h> >> #include <linux/ahci_platform.h> >> +#ifdef CONFIG_ATA_ACPI >> +#include <linux/acpi.h> >> +#endif >> #include "ahci.h" >> >> static const struct ata_port_info ahci_port_info = { >> @@ -87,6 +90,13 @@ static const struct of_device_id ahci_of_match[] = { >> }; >> MODULE_DEVICE_TABLE(of, ahci_of_match); >> >> +#ifdef CONFIG_ATA_ACPI >> +static const struct acpi_device_id ahci_acpi_match[] = { >> + { "AMDI0600", 0 }, /* AMD Seattle AHCI */ >> + { }, >> +}; >> +#endif >> + >> static struct platform_driver ahci_driver = { >> .probe = ahci_probe, >> .remove = ata_platform_remove_one, >> @@ -94,6 +104,9 @@ static struct platform_driver ahci_driver = { >> .name = "ahci", >> .owner = THIS_MODULE, >> .of_match_table = ahci_of_match, >> +#ifdef CONFIG_ATA_ACPI >> + .acpi_match_table = ACPI_PTR(ahci_acpi_match), >> +#endif > > The whole point of having ACPI_PTR() is to avoid having ifdefs like > these. The structure member is always there, so there's no need to > have it conditionally compiled out. > > Come to think of it, the match table should be under CONFIG_ACPI > instead -- why do a separate config option just for this? To clarify this for people like me who were under the impression that ACPI_PTR() does some kind of cast, this is the definition of ACPI_PTR: #ifdef CONFIG_ACPI #define ACPI_PTR(_ptr) (_ptr) #else #define ACPI_PTR(_ptr) (NULL) #endif Regards, Hans > > > -Olof > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On 09/11/2014 03:17 PM, Olof Johansson wrote: > On Tue, Sep 9, 2014 at 1:37 PM, <suravee.suthikulpanit@amd.com> wrote: >> From: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> >> >> This patch adds ACPI support for non-PCI SATA contoller in ahci_platform driver. >> It adds ACPI matching table in ahci_platform to support AMD Seattle SATA controller >> with following ASL structure in DSDT: >> >> Device (SATA0) >> { >> Name(_HID, "AMDI0600") // Seattle AHSATA >> Name (_CCA, 1) // Cache-coherent controller >> Name (_CRS, ResourceTemplate () >> { >> Memory32Fixed (ReadWrite, 0xE0300000, 0x00010000) >> Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive,,,) { 387 } >> }) >> } >> >> Since ATA driver should not require PCI support for ATA_ACPI, >> this patch also removes dependency in the driver/ata/Kconfig. >> >> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> >> --- >> drivers/ata/Kconfig | 2 +- >> drivers/ata/ahci_platform.c | 13 +++++++++++++ >> 2 files changed, 14 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig >> index e1b9278..f2e6c9e 100644 >> --- a/drivers/ata/Kconfig >> +++ b/drivers/ata/Kconfig >> @@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR >> >> config ATA_ACPI >> bool "ATA ACPI Support" >> - depends on ACPI && PCI >> + depends on ACPI >> default y >> help >> This option adds support for ATA-related ACPI objects. >> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c >> index f61ddb9..3499bab 100644 >> --- a/drivers/ata/ahci_platform.c >> +++ b/drivers/ata/ahci_platform.c >> @@ -20,6 +20,9 @@ >> #include <linux/platform_device.h> >> #include <linux/libata.h> >> #include <linux/ahci_platform.h> >> +#ifdef CONFIG_ATA_ACPI >> +#include <linux/acpi.h> >> +#endif >> #include "ahci.h" >> >> static const struct ata_port_info ahci_port_info = { >> @@ -87,6 +90,13 @@ static const struct of_device_id ahci_of_match[] = { >> }; >> MODULE_DEVICE_TABLE(of, ahci_of_match); >> >> +#ifdef CONFIG_ATA_ACPI >> +static const struct acpi_device_id ahci_acpi_match[] = { >> + { "AMDI0600", 0 }, /* AMD Seattle AHCI */ >> + { }, >> +}; >> +#endif >> + >> static struct platform_driver ahci_driver = { >> .probe = ahci_probe, >> .remove = ata_platform_remove_one, >> @@ -94,6 +104,9 @@ static struct platform_driver ahci_driver = { >> .name = "ahci", >> .owner = THIS_MODULE, >> .of_match_table = ahci_of_match, >> +#ifdef CONFIG_ATA_ACPI >> + .acpi_match_table = ACPI_PTR(ahci_acpi_match), >> +#endif > > The whole point of having ACPI_PTR() is to avoid having ifdefs like > these. The structure member is always there, so there's no need to > have it conditionally compiled out. > > Come to think of it, the match table should be under CONFIG_ACPI > instead -- why do a separate config option just for this? > > > -Olof > Good point. Thanks. I will make change to this, and send out the next one soon. Suravee -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e1b9278..f2e6c9e 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -48,7 +48,7 @@ config ATA_VERBOSE_ERROR config ATA_ACPI bool "ATA ACPI Support" - depends on ACPI && PCI + depends on ACPI default y help This option adds support for ATA-related ACPI objects. diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index f61ddb9..3499bab 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -20,6 +20,9 @@ #include <linux/platform_device.h> #include <linux/libata.h> #include <linux/ahci_platform.h> +#ifdef CONFIG_ATA_ACPI +#include <linux/acpi.h> +#endif #include "ahci.h" static const struct ata_port_info ahci_port_info = { @@ -87,6 +90,13 @@ static const struct of_device_id ahci_of_match[] = { }; MODULE_DEVICE_TABLE(of, ahci_of_match); +#ifdef CONFIG_ATA_ACPI +static const struct acpi_device_id ahci_acpi_match[] = { + { "AMDI0600", 0 }, /* AMD Seattle AHCI */ + { }, +}; +#endif + static struct platform_driver ahci_driver = { .probe = ahci_probe, .remove = ata_platform_remove_one, @@ -94,6 +104,9 @@ static struct platform_driver ahci_driver = { .name = "ahci", .owner = THIS_MODULE, .of_match_table = ahci_of_match, +#ifdef CONFIG_ATA_ACPI + .acpi_match_table = ACPI_PTR(ahci_acpi_match), +#endif .pm = &ahci_pm_ops, }, };