@@ -662,7 +662,6 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *mode_info;
EFI_FILE_HANDLE dir_handle;
union string section = { NULL }, name;
- u64 efer;
bool_t base_video = 0;
UINT32 mmap_desc_ver = 0;
UINTN mmap_size, mmap_desc_size, mmap_key = 0;
@@ -1274,12 +1273,7 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
efi_arch_process_memory_map(SystemTable, mmap, mmap_size,
mmap_desc_size, mmap_desc_ver);
- if ( !trampoline_phys )
- {
- if ( !cfg.addr )
- blexit(L"No memory for trampoline");
- relocate_trampoline(cfg.addr);
- }
+ efi_arch_pre_exit_boot();
status = efi_bs->ExitBootServices(ImageHandle, mmap_key);
if ( EFI_ERROR(status) )
@@ -1293,39 +1287,7 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE *SystemTable)
efi_memmap = (void *)efi_memmap + DIRECTMAP_VIRT_START;
efi_fw_vendor = (void *)efi_fw_vendor + DIRECTMAP_VIRT_START;
- efi_arch_relocate_image(__XEN_VIRT_START - xen_phys_start);
- memcpy((void *)trampoline_phys, trampoline_start, cfg.size);
-
- /* Set system registers and transfer control. */
- asm volatile("pushq $0\n\tpopfq");
- rdmsrl(MSR_EFER, efer);
- efer |= EFER_SCE;
- if ( cpuid_ext_features & (1 << (X86_FEATURE_NX & 0x1f)) )
- efer |= EFER_NX;
- wrmsrl(MSR_EFER, efer);
- write_cr0(X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | X86_CR0_NE | X86_CR0_WP |
- X86_CR0_AM | X86_CR0_PG);
- asm volatile ( "mov %[cr4], %%cr4\n\t"
- "mov %[cr3], %%cr3\n\t"
- "movabs $__start_xen, %[rip]\n\t"
- "lgdt gdt_descr(%%rip)\n\t"
- "mov stack_start(%%rip), %%rsp\n\t"
- "mov %[ds], %%ss\n\t"
- "mov %[ds], %%ds\n\t"
- "mov %[ds], %%es\n\t"
- "mov %[ds], %%fs\n\t"
- "mov %[ds], %%gs\n\t"
- "movl %[cs], 8(%%rsp)\n\t"
- "mov %[rip], (%%rsp)\n\t"
- "lretq %[stkoff]-16"
- : [rip] "=&r" (efer/* any dead 64-bit variable */)
- : [cr3] "r" (idle_pg_table),
- [cr4] "r" (mmu_cr4_features),
- [cs] "ir" (__HYPERVISOR_CS),
- [ds] "r" (__HYPERVISOR_DS),
- [stkoff] "i" (STACK_SIZE - sizeof(struct cpu_info)),
- "D" (&mbi)
- : "memory" );
+ efi_arch_post_exit_boot();
for( ; ; ); /* not reached */
}
@@ -209,3 +209,53 @@ static void *__init efi_arch_allocate_mmap_buffer(UINTN map_size)
return NULL;
return (void *)(long)mbi.mem_upper;
}
+
+static void __init efi_arch_pre_exit_boot(void)
+{
+ if ( !trampoline_phys )
+ {
+ if ( !cfg.addr )
+ blexit(L"No memory for trampoline");
+ relocate_trampoline(cfg.addr);
+ }
+}
+
+static void __init noreturn efi_arch_post_exit_boot(void)
+{
+ u64 efer;
+
+ efi_arch_relocate_image(__XEN_VIRT_START - xen_phys_start);
+ memcpy((void *)trampoline_phys, trampoline_start, cfg.size);
+
+ /* Set system registers and transfer control. */
+ asm volatile("pushq $0\n\tpopfq");
+ rdmsrl(MSR_EFER, efer);
+ efer |= EFER_SCE;
+ if ( cpuid_ext_features & (1 << (X86_FEATURE_NX & 0x1f)) )
+ efer |= EFER_NX;
+ wrmsrl(MSR_EFER, efer);
+ write_cr0(X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | X86_CR0_NE | X86_CR0_WP |
+ X86_CR0_AM | X86_CR0_PG);
+ asm volatile ( "mov %[cr4], %%cr4\n\t"
+ "mov %[cr3], %%cr3\n\t"
+ "movabs $__start_xen, %[rip]\n\t"
+ "lgdt gdt_descr(%%rip)\n\t"
+ "mov stack_start(%%rip), %%rsp\n\t"
+ "mov %[ds], %%ss\n\t"
+ "mov %[ds], %%ds\n\t"
+ "mov %[ds], %%es\n\t"
+ "mov %[ds], %%fs\n\t"
+ "mov %[ds], %%gs\n\t"
+ "movl %[cs], 8(%%rsp)\n\t"
+ "mov %[rip], (%%rsp)\n\t"
+ "lretq %[stkoff]-16"
+ : [rip] "=&r" (efer/* any dead 64-bit variable */)
+ : [cr3] "r" (idle_pg_table),
+ [cr4] "r" (mmu_cr4_features),
+ [cs] "ir" (__HYPERVISOR_CS),
+ [ds] "r" (__HYPERVISOR_DS),
+ [stkoff] "i" (STACK_SIZE - sizeof(struct cpu_info)),
+ "D" (&mbi)
+ : "memory" );
+ for( ; ; ); /* not reached */
+}
The UEFI ExitBootServices function is invoked to transition the system to the 'runtime' mode of operation, and is done right before transitioning from the EFI loader code into Xen proper. x86 does some arch specific memory management (trampoline) before exit boot services, and the code that transitions from the EFI application state to Xen is architecture specific. This patch adds two functions, one pre and one post ExitBootServices to allow each architecture to to handle these cases in a customized manner. Signed-off-by: Roy Franz <roy.franz@linaro.org> --- xen/common/efi/boot.c | 42 ++--------------------------------- xen/include/asm-x86/efi-boot.h | 50 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+), 40 deletions(-)