| Message ID | 53FDCADE.3040601@ti.com |
|---|---|
| State | New |
| Headers | show |
On Wed, Aug 27, 2014 at 03:11:10PM +0300, Roger Quadros wrote: > If user specifies that USB autosuspend must be disabled by module > parameter "usbcore.autosuspend=-1" then we must prevent > autosuspend of USB hub devices as well. > > commit 596d789a211d introduced in v3.8 changed the original behaivour > and stopped respecting the usbcore.autosuspend parameter for hubs. > > Fixes: 596d789a211d "USB: set hub's default autosuspend delay as 0" > > Cc: [3.8+] <stable@vger.kernel.org> > Signed-off-by: Roger Quadros <rogerq@ti.com> > --- > drivers/usb/core/hub.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > index 8a4dcbc..59b599d 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -1728,8 +1728,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) > * - Change autosuspend delay of hub can avoid unnecessary auto > * suspend timer for hub, also may decrease power consumption > * of USB bus. > + * > + * - If user has indicated to prevent autosuspend by passing > + * usbcore.autosuspend = -1 then keep autosuspend disabled. > */ > - pm_runtime_set_autosuspend_delay(&hdev->dev, 0); > +#ifdef CONFIG_PM_RUNTIME > + if (hdev->dev.power.autosuspend_delay >= 0) > + pm_runtime_set_autosuspend_delay(&hdev->dev, 0); > +#endif > > /* > * Hubs have proper suspend/resume support, except for root hubs Sorry, but can I have a patch that just adds the #ifdef as I already have your original one in my tree. thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On 08/28/2014 12:02 AM, Greg KH wrote: > On Wed, Aug 27, 2014 at 12:23:39PM -0700, Greg KH wrote: >> On Wed, Aug 27, 2014 at 03:11:10PM +0300, Roger Quadros wrote: >>> If user specifies that USB autosuspend must be disabled by module >>> parameter "usbcore.autosuspend=-1" then we must prevent >>> autosuspend of USB hub devices as well. >>> >>> commit 596d789a211d introduced in v3.8 changed the original behaivour >>> and stopped respecting the usbcore.autosuspend parameter for hubs. >>> >>> Fixes: 596d789a211d "USB: set hub's default autosuspend delay as 0" >>> >>> Cc: [3.8+] <stable@vger.kernel.org> >>> Signed-off-by: Roger Quadros <rogerq@ti.com> >>> --- >>> drivers/usb/core/hub.c | 8 +++++++- >>> 1 file changed, 7 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c >>> index 8a4dcbc..59b599d 100644 >>> --- a/drivers/usb/core/hub.c >>> +++ b/drivers/usb/core/hub.c >>> @@ -1728,8 +1728,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) >>> * - Change autosuspend delay of hub can avoid unnecessary auto >>> * suspend timer for hub, also may decrease power consumption >>> * of USB bus. >>> + * >>> + * - If user has indicated to prevent autosuspend by passing >>> + * usbcore.autosuspend = -1 then keep autosuspend disabled. >>> */ >>> - pm_runtime_set_autosuspend_delay(&hdev->dev, 0); >>> +#ifdef CONFIG_PM_RUNTIME >>> + if (hdev->dev.power.autosuspend_delay >= 0) >>> + pm_runtime_set_autosuspend_delay(&hdev->dev, 0); >>> +#endif >>> >>> /* >>> * Hubs have proper suspend/resume support, except for root hubs >> >> Sorry, but can I have a patch that just adds the #ifdef as I already >> have your original one in my tree. > > This should be all that is needed, right? > > --------- > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > index 003cb6b1a6bf..46f5161c7891 100644 > --- a/drivers/usb/core/hub.c > +++ b/drivers/usb/core/hub.c > @@ -1732,8 +1732,10 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) > * - If user has indicated to prevent autosuspend by passing > * usbcore.autosuspend = -1 then keep autosuspend disabled. > */ > +#ifdef CONFIG_PM_RUNTIME > if (hdev->dev.power.autosuspend_delay >= 0) > pm_runtime_set_autosuspend_delay(&hdev->dev, 0); > +#endif > > /* > * Hubs have proper suspend/resume support, except for root hubs > Yes. Thanks Greg. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8a4dcbc..59b599d 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1728,8 +1728,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) * - Change autosuspend delay of hub can avoid unnecessary auto * suspend timer for hub, also may decrease power consumption * of USB bus. + * + * - If user has indicated to prevent autosuspend by passing + * usbcore.autosuspend = -1 then keep autosuspend disabled. */ - pm_runtime_set_autosuspend_delay(&hdev->dev, 0); +#ifdef CONFIG_PM_RUNTIME + if (hdev->dev.power.autosuspend_delay >= 0) + pm_runtime_set_autosuspend_delay(&hdev->dev, 0); +#endif /* * Hubs have proper suspend/resume support, except for root hubs
If user specifies that USB autosuspend must be disabled by module parameter "usbcore.autosuspend=-1" then we must prevent autosuspend of USB hub devices as well. commit 596d789a211d introduced in v3.8 changed the original behaivour and stopped respecting the usbcore.autosuspend parameter for hubs. Fixes: 596d789a211d "USB: set hub's default autosuspend delay as 0" Cc: [3.8+] <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> --- drivers/usb/core/hub.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)