| Message ID | 1405628200-21776-1-git-send-email-srinivas.kandagatla@linaro.org |
|---|---|
| State | New |
| Headers | show |
tested-by: Prakash Burla <prakash.burla@smartplayin.com> This driver tested on IFC6410 with USB Driver. On Fri, Jul 18, 2014 at 1:46 AM, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> wrote: > This patch makes the phy reset clk and reset line optional as this clk > is not available on boards like IFC6410 with APQ8064. > > phy-reset clk is only used as argument to the mach level callbacks, so > this patch adds condition before clk_get calls so that the driver > wouldn't fail on SOCs which do not have this support. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > Hi Felipe, > > With this new patch now the error message is only printed if the SOC actually supports > the phy reset clk, for SOCs like APQ8064 where there is no phy reset clock or > the callback which takes it there is no point in doing a clk_get call in the first place. > > > Thanks, > srini > > > > > drivers/usb/phy/phy-msm-usb.c | 17 ++++++++++------- > 1 file changed, 10 insertions(+), 7 deletions(-) > > diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c > index c929370..aa8e2b9 100644 > --- a/drivers/usb/phy/phy-msm-usb.c > +++ b/drivers/usb/phy/phy-msm-usb.c > @@ -279,11 +279,11 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) > > static int msm_otg_phy_clk_reset(struct msm_otg *motg) > { > - int ret; > + int ret = 0; > > if (motg->pdata->phy_clk_reset) > ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk); > - else > + else if (motg->phy_rst) > ret = reset_control_reset(motg->phy_rst); > > if (ret) > @@ -1466,7 +1466,7 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) > > motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy"); > if (IS_ERR(motg->phy_rst)) > - return PTR_ERR(motg->phy_rst); > + motg->phy_rst = NULL; > > pdata->mode = of_usb_get_dr_mode(node); > if (pdata->mode == USB_DR_MODE_UNKNOWN) > @@ -1554,11 +1554,14 @@ static int msm_otg_probe(struct platform_device *pdev) > phy = &motg->phy; > phy->dev = &pdev->dev; > > - motg->phy_reset_clk = devm_clk_get(&pdev->dev, > + if (motg->pdata->phy_clk_reset) { > + motg->phy_reset_clk = devm_clk_get(&pdev->dev, > np ? "phy" : "usb_phy_clk"); > - if (IS_ERR(motg->phy_reset_clk)) { > - dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); > - return PTR_ERR(motg->phy_reset_clk); > + > + if (IS_ERR(motg->phy_reset_clk)) { > + dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); > + return PTR_ERR(motg->phy_reset_clk); > + } > } > > motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk"); > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jul 17, 2014 at 09:16:40PM +0100, Srinivas Kandagatla wrote: > This patch makes the phy reset clk and reset line optional as this clk > is not available on boards like IFC6410 with APQ8064. > > phy-reset clk is only used as argument to the mach level callbacks, so > this patch adds condition before clk_get calls so that the driver > wouldn't fail on SOCs which do not have this support. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > Hi Felipe, > > With this new patch now the error message is only printed if the SOC actually supports > the phy reset clk, for SOCs like APQ8064 where there is no phy reset clock or > the callback which takes it there is no point in doing a clk_get call in the first place. doesn't apply. Please rebase on top of v3.17-rc1
Thanks Felipe, On 20/08/14 16:57, Felipe Balbi wrote: > On Thu, Jul 17, 2014 at 09:16:40PM +0100, Srinivas Kandagatla wrote: >> This patch makes the phy reset clk and reset line optional as this clk >> is not available on boards like IFC6410 with APQ8064. >> >> phy-reset clk is only used as argument to the mach level callbacks, so >> this patch adds condition before clk_get calls so that the driver >> wouldn't fail on SOCs which do not have this support. >> >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> --- >> Hi Felipe, >> >> With this new patch now the error message is only printed if the SOC actually supports >> the phy reset clk, for SOCs like APQ8064 where there is no phy reset clock or >> the callback which takes it there is no point in doing a clk_get call in the first place. > > doesn't apply. Please rebase on top of v3.17-rc1 > this is because a previous version of the same patch got applied. Anyway I will rebase this patch and send v3. thanks, srini -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index c929370..aa8e2b9 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -279,11 +279,11 @@ static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) static int msm_otg_phy_clk_reset(struct msm_otg *motg) { - int ret; + int ret = 0; if (motg->pdata->phy_clk_reset) ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk); - else + else if (motg->phy_rst) ret = reset_control_reset(motg->phy_rst); if (ret) @@ -1466,7 +1466,7 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy"); if (IS_ERR(motg->phy_rst)) - return PTR_ERR(motg->phy_rst); + motg->phy_rst = NULL; pdata->mode = of_usb_get_dr_mode(node); if (pdata->mode == USB_DR_MODE_UNKNOWN) @@ -1554,11 +1554,14 @@ static int msm_otg_probe(struct platform_device *pdev) phy = &motg->phy; phy->dev = &pdev->dev; - motg->phy_reset_clk = devm_clk_get(&pdev->dev, + if (motg->pdata->phy_clk_reset) { + motg->phy_reset_clk = devm_clk_get(&pdev->dev, np ? "phy" : "usb_phy_clk"); - if (IS_ERR(motg->phy_reset_clk)) { - dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); - return PTR_ERR(motg->phy_reset_clk); + + if (IS_ERR(motg->phy_reset_clk)) { + dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); + return PTR_ERR(motg->phy_reset_clk); + } } motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
This patch makes the phy reset clk and reset line optional as this clk is not available on boards like IFC6410 with APQ8064. phy-reset clk is only used as argument to the mach level callbacks, so this patch adds condition before clk_get calls so that the driver wouldn't fail on SOCs which do not have this support. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- Hi Felipe, With this new patch now the error message is only printed if the SOC actually supports the phy reset clk, for SOCs like APQ8064 where there is no phy reset clock or the callback which takes it there is no point in doing a clk_get call in the first place. Thanks, srini drivers/usb/phy/phy-msm-usb.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)