| Message ID | 1337763451-20228-2-git-send-email-rajeshwari.s@samsung.com |
|---|---|
| State | New |
| Headers | show |
ccing Lukasz Majewski. On Wed, May 23, 2012 at 2:27 PM, Rajeshwari Shinde <rajeshwari.s@samsung.com> wrote: > This patch enables MAX77686 pmic chip for SMDK5250. > > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> > --- > This patch is based on: > "EXYNOS: SMDK5250: Enable the pinmux setup" and > "CONFIG: SMDK5250: I2C: Enable I2C" > board/samsung/smdk5250/smdk5250.c | 4 ++++ > include/configs/smdk5250.h | 6 ++++++ > 2 files changed, 10 insertions(+), 0 deletions(-) > > diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c > index b7d7a79..58763fd 100644 > --- a/board/samsung/smdk5250/smdk5250.c > +++ b/board/samsung/smdk5250/smdk5250.c > @@ -28,6 +28,7 @@ > #include <asm/arch/mmc.h> > #include <asm/arch/pinmux.h> > #include <asm/arch/sromc.h> > +#include <pmic.h> > > DECLARE_GLOBAL_DATA_PTR; > > @@ -59,6 +60,9 @@ static void smc9115_pre_init(void) > int board_init(void) > { > gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); > +#if defined(CONFIG_PMIC) > + pmic_init(); > +#endif > return 0; > } > > diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h > index 1fca652..05729e6 100644 > --- a/include/configs/smdk5250.h > +++ b/include/configs/smdk5250.h > @@ -198,6 +198,12 @@ > #define CONFIG_I2C_MULTI_BUS > #define CONFIG_MAX_I2C_NUM 8 > > +/* PMIC */ > +#define CONFIG_SYS_I2C_SLAVE 0x0 > +#define CONFIG_PMIC > +#define CONFIG_PMIC_I2C > +#define CONFIG_PMIC_MAX77686 > + > /* Ethernet Controllor Driver */ > #ifdef CONFIG_CMD_NET > #define CONFIG_SMC911X > -- > 1.7.4.4 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot
Hi Rajeshwari, > ccing Lukasz Majewski. > > On Wed, May 23, 2012 at 2:27 PM, Rajeshwari Shinde > <rajeshwari.s@samsung.com> wrote: > > This patch enables MAX77686 pmic chip for SMDK5250. > > > > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> > > --- > > This patch is based on: > > "EXYNOS: SMDK5250: Enable the pinmux setup" and > > "CONFIG: SMDK5250: I2C: Enable I2C" > > board/samsung/smdk5250/smdk5250.c | 4 ++++ > > include/configs/smdk5250.h | 6 ++++++ > > 2 files changed, 10 insertions(+), 0 deletions(-) > > > > diff --git a/board/samsung/smdk5250/smdk5250.c > > b/board/samsung/smdk5250/smdk5250.c index b7d7a79..58763fd 100644 > > --- a/board/samsung/smdk5250/smdk5250.c > > +++ b/board/samsung/smdk5250/smdk5250.c > > @@ -28,6 +28,7 @@ > > #include <asm/arch/mmc.h> > > #include <asm/arch/pinmux.h> > > #include <asm/arch/sromc.h> > > +#include <pmic.h> > > > > DECLARE_GLOBAL_DATA_PTR; > > > > @@ -59,6 +60,9 @@ static void smc9115_pre_init(void) > > int board_init(void) > > { > > gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); > > +#if defined(CONFIG_PMIC) > > + pmic_init(); > > +#endif > > return 0; > > } > > > > diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h > > index 1fca652..05729e6 100644 > > --- a/include/configs/smdk5250.h > > +++ b/include/configs/smdk5250.h > > @@ -198,6 +198,12 @@ > > #define CONFIG_I2C_MULTI_BUS > > #define CONFIG_MAX_I2C_NUM 8 > > > > +/* PMIC */ > > +#define CONFIG_SYS_I2C_SLAVE 0x0 > > +#define CONFIG_PMIC > > +#define CONFIG_PMIC_I2C > > +#define CONFIG_PMIC_MAX77686 > > + > > /* Ethernet Controllor Driver */ > > #ifdef CONFIG_CMD_NET > > #define CONFIG_SMC911X > > -- > > 1.7.4.4 > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot Acked-by: Lukasz Majewski <l.majewski@samsung.com>
On Wed, May 23, 2012 at 1:57 AM, Rajeshwari Shinde <rajeshwari.s@samsung.com > wrote: > This patch enables MAX77686 pmic chip for SMDK5250. > > Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> > Acked-by: Simon Glass <sjg@chromium.org> > --- > This patch is based on: > "EXYNOS: SMDK5250: Enable the pinmux setup" and > "CONFIG: SMDK5250: I2C: Enable I2C" > board/samsung/smdk5250/smdk5250.c | 4 ++++ > include/configs/smdk5250.h | 6 ++++++ > 2 files changed, 10 insertions(+), 0 deletions(-) > > diff --git a/board/samsung/smdk5250/smdk5250.c > b/board/samsung/smdk5250/smdk5250.c > index b7d7a79..58763fd 100644 > --- a/board/samsung/smdk5250/smdk5250.c > +++ b/board/samsung/smdk5250/smdk5250.c > @@ -28,6 +28,7 @@ > #include <asm/arch/mmc.h> > #include <asm/arch/pinmux.h> > #include <asm/arch/sromc.h> > +#include <pmic.h> > > DECLARE_GLOBAL_DATA_PTR; > > @@ -59,6 +60,9 @@ static void smc9115_pre_init(void) > int board_init(void) > { > gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); > +#if defined(CONFIG_PMIC) > + pmic_init(); > +#endif > return 0; > } > > diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h > index 1fca652..05729e6 100644 > --- a/include/configs/smdk5250.h > +++ b/include/configs/smdk5250.h > @@ -198,6 +198,12 @@ > #define CONFIG_I2C_MULTI_BUS > #define CONFIG_MAX_I2C_NUM 8 > > +/* PMIC */ > +#define CONFIG_SYS_I2C_SLAVE 0x0 > +#define CONFIG_PMIC > +#define CONFIG_PMIC_I2C > +#define CONFIG_PMIC_MAX77686 > + > /* Ethernet Controllor Driver */ > #ifdef CONFIG_CMD_NET > #define CONFIG_SMC911X > -- > 1.7.4.4 > >
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index b7d7a79..58763fd 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -28,6 +28,7 @@ #include <asm/arch/mmc.h> #include <asm/arch/pinmux.h> #include <asm/arch/sromc.h> +#include <pmic.h> DECLARE_GLOBAL_DATA_PTR; @@ -59,6 +60,9 @@ static void smc9115_pre_init(void) int board_init(void) { gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); +#if defined(CONFIG_PMIC) + pmic_init(); +#endif return 0; } diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 1fca652..05729e6 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -198,6 +198,12 @@ #define CONFIG_I2C_MULTI_BUS #define CONFIG_MAX_I2C_NUM 8 +/* PMIC */ +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_PMIC +#define CONFIG_PMIC_I2C +#define CONFIG_PMIC_MAX77686 + /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET #define CONFIG_SMC911X
This patch enables MAX77686 pmic chip for SMDK5250. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> --- This patch is based on: "EXYNOS: SMDK5250: Enable the pinmux setup" and "CONFIG: SMDK5250: I2C: Enable I2C" board/samsung/smdk5250/smdk5250.c | 4 ++++ include/configs/smdk5250.h | 6 ++++++ 2 files changed, 10 insertions(+), 0 deletions(-)