| Message ID | 1403547659-24558-3-git-send-email-balbi@ti.com |
|---|---|
| State | Accepted |
| Commit | 4a45787dec8a15b211110be807b4f4aad2828385 |
| Headers | show |
Tested-by: Franklin Cooper Jr. <fcooper@ti.com> > -----Original Message----- > From: Balbi, Felipe > Sent: Monday, June 23, 2014 1:21 PM > To: Benoit Cousson > Cc: robh+dt@kernel.org; galak@codeaurora.org; Tony Lindgren; > linux@arm.linux.org.uk; Nayak, Rajendra; Menon, Nishanth; R, Sricharan; > devicetree@vger.kernel.org; Linux Kernel Mailing List; Linux OMAP Mailing > List; Linux ARM Kernel Mailing List; Balbi, Felipe; Elliott, Josh; Etheridge, > Darren > Subject: [PATCH v3 2/2] arm: dts: add support for AM437x StarterKit > > Add support for TI's AM437x StarterKit Evaluation Module. > > Cc: Josh Elliot <jelliott@ti.com> > Cc: Darren Etheridge <detheridge@ti.com> > Signed-off-by: Felipe Balbi <balbi@ti.com> > --- > > changes since v1: > - add pinctrl for leds and matrix keypad > - added i2c1 and i2c0 speeds of 400k > - added voltage for vdds_ddr > - reordered mmc1 node > > left the USB supply thing out because a) the driver doesn't use it and b) the > regulator will be automatically sitched off iff DRVVBUS signal goes low (that's > done automatically by the HW). Not to mention that there's really no benefit > from the kernel or userland point of view. > > (I do have a patch for that locally though, so if people really want it, I can > easily fold the patch into this). > > All patches are available at [1] > > [1] https://git.kernel.org/cgit/linux/kernel/git/balbi/usb.git/log/?h=am437x- > starterkit > > .../devicetree/bindings/arm/omap/omap.txt | 3 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/am437x-sk-evm.dts | 613 > +++++++++++++++++++++ > 3 files changed, 617 insertions(+) > create mode 100644 arch/arm/boot/dts/am437x-sk-evm.dts > > diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt > b/Documentation/devicetree/bindings/arm/omap/omap.txt > index d22b216..0edc903 100644 > --- a/Documentation/devicetree/bindings/arm/omap/omap.txt > +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt > @@ -129,6 +129,9 @@ Boards: > - AM437x GP EVM > compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43" > > +- AM437x SK EVM: AM437x StarterKit Evaluation Module > + compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43" > + > - DRA742 EVM: Software Development Board for DRA742 > compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index > 621c6c5..a85a4b8 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -306,6 +306,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero- > parlor.dtb \ > omap4-var-dvk-om44.dtb \ > omap4-var-stk-om44.dtb > dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \ > + am437x-sk-evm.dtb \ > am437x-gp-evm.dtb > dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ > omap5-sbc-t54.dtb \ > diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts > b/arch/arm/boot/dts/am437x-sk-evm.dts > new file mode 100644 > index 0000000..859ff3d > --- /dev/null > +++ b/arch/arm/boot/dts/am437x-sk-evm.dts > @@ -0,0 +1,613 @@ > +/* > + * Copyright (C) 2014 Texas Instruments Incorporated - > +http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/* AM437x SK EVM */ > + > +/dts-v1/; > + > +#include "am4372.dtsi" > +#include <dt-bindings/pinctrl/am43xx.h> #include > +<dt-bindings/pwm/pwm.h> #include <dt-bindings/gpio/gpio.h> #include > +<dt-bindings/input/input.h> > + > +/ { > + model = "TI AM437x SK EVM"; > + compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43"; > + > + aliases { > + display0 = &lcd0; > + }; > + > + backlight { > + compatible = "pwm-backlight"; > + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; > + brightness-levels = <0 51 53 56 62 75 101 152 255>; > + default-brightness-level = <8>; > + }; > + > + sound { > + compatible = "ti,da830-evm-audio"; > + ti,model = "AM437x-SK-EVM"; > + ti,audio-codec = <&tlv320aic3106>; > + ti,mcasp-controller = <&mcasp1>; > + ti,codec-clock-rate = <24000000>; > + ti,audio-routing = > + "Headphone Jack", "HPLOUT", > + "Headphone Jack", "HPROUT"; > + }; > + > + matrix_keypad: matrix_keypad@0 { > + compatible = "gpio-matrix-keypad"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&matrix_keypad_pins>; > + > + debounce-delay-ms = <5>; > + col-scan-delay-us = <1500>; > + > + row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* > Bank5, pin5 */ > + &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, > pin6 */ > + > + col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* > Bank5, pin13 */ > + &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, > pin4 */ > + > + linux,keymap = < > + MATRIX_KEY(0, 0, KEY_DOWN) > + MATRIX_KEY(0, 1, KEY_RIGHT) > + MATRIX_KEY(1, 0, KEY_LEFT) > + MATRIX_KEY(1, 1, KEY_UP) > + >; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&leds_pins>; > + > + led@0 { > + label = "am437x-sk:red:heartbeat"; > + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin > 0 */ > + linux,default-trigger = "heartbeat"; > + default-state = "off"; > + }; > + > + led@1 { > + label = "am437x-sk:green:mmc1"; > + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin > 1 */ > + linux,default-trigger = "mmc0"; > + default-state = "off"; > + }; > + > + led@2 { > + label = "am437x-sk:blue:cpu0"; > + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin > 2 */ > + linux,default-trigger = "cpu0"; > + default-state = "off"; > + }; > + > + led@3 { > + label = "am437x-sk:blue:usr3"; > + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin > 3 */ > + default-state = "off"; > + }; > + }; > + > + lcd0: display { > + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; > + label = "lcd"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&lcd_pins>; > + > + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; > + > + panel-timing { > + clock-frequency = <9000000>; > + hactive = <480>; > + vactive = <272>; > + hfront-porch = <8>; > + hback-porch = <43>; > + hsync-len = <4>; > + vback-porch = <12>; > + vfront-porch = <4>; > + vsync-len = <10>; > + hsync-active = <0>; > + vsync-active = <0>; > + de-active = <1>; > + pixelclk-active = <1>; > + }; > + > + port { > + lcd_in: endpoint { > + remote-endpoint = <&dpi_out>; > + }; > + }; > + }; > +}; > + > +&am43xx_pinmux { > + matrix_keypad_pins: matrix_keypad_pins { > + pinctrl-single,pins = < > + 0x24c (PIN_OUTPUT | MUX_MODE7) /* > gpio5_13.gpio5_13 */ > + 0x250 (PIN_OUTPUT | MUX_MODE7) /* > spi4_sclk.gpio5_4 */ > + 0x254 (PIN_INPUT | MUX_MODE7) /* > spi4_d0.gpio5_5 */ > + 0x258 (PIN_INPUT | MUX_MODE7) /* > spi4_d1.gpio5_5 */ > + >; > + }; > + > + leds_pins: leds_pins { > + pinctrl-single,pins = < > + 0x228 (PIN_OUTPUT | MUX_MODE7) /* > uart3_rxd.gpio5_2 */ > + 0x22c (PIN_OUTPUT | MUX_MODE7) /* > uart3_txd.gpio5_3 */ > + 0x230 (PIN_OUTPUT | MUX_MODE7) /* > uart3_ctsn.gpio5_0 */ > + 0x234 (PIN_OUTPUT | MUX_MODE7) /* > uart3_rtsn.gpio5_1 */ > + >; > + }; > + > + i2c0_pins: i2c0_pins { > + pinctrl-single,pins = < > + 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | > MUX_MODE0) /* i2c0_sda.i2c0_sda */ > + 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | > MUX_MODE0) /* i2c0_scl.i2c0_scl */ > + >; > + }; > + > + i2c1_pins: i2c1_pins { > + pinctrl-single,pins = < > + 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | > MUX_MODE2) /* spi0_cs0.i2c1_scl */ > + 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | > MUX_MODE2) /* spi0_d1.i2c1_sda */ > + >; > + }; > + > + mmc1_pins: pinmux_mmc1_pins { > + pinctrl-single,pins = < > + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 > */ > + >; > + }; > + > + ecap0_pins: backlight_pins { > + pinctrl-single,pins = < > + 0x164 (PIN_OUTPUT | MUX_MODE0) /* > eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ > + >; > + }; > + > + edt_ft5306_ts_pins: edt_ft5306_ts_pins { > + pinctrl-single,pins = < > + 0x74 (PIN_INPUT | MUX_MODE7) /* > gpmc_wpn.gpio0_31 */ > + 0x78 (PIN_OUTPUT | MUX_MODE7) /* > gpmc_be1n.gpio1_28 */ > + >; > + }; > + > + cpsw_default: cpsw_default { > + pinctrl-single,pins = < > + /* Slave 1 */ > + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) > /* mii1_txclk.rmii1_tclk */ > + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) > /* mii1_txen.rgmii1_tctl */ > + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) > /* mii1_txd0.rgmii1_td0 */ > + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) > /* mii1_txd1.rgmii1_td1 */ > + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) > /* mii1_txd0.rgmii1_td2 */ > + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) > /* mii1_txd1.rgmii1_td3 */ > + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > mii1_rxclk.rmii1_rclk */ > + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > mii1_rxdv.rgmii1_rctl */ > + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > mii1_rxd0.rgmii1_rd0 */ > + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > mii1_rxd1.rgmii1_rd1 */ > + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > mii1_rxd0.rgmii1_rd2 */ > + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > mii1_rxd1.rgmii1_rd3 */ > + > + /* Slave 2 */ > + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a6.rgmii2_tclk */ > + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a0.rgmii2_tctl */ > + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a5.rgmii2_td0 */ > + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a4.rgmii2_td1 */ > + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a3.rgmii2_td2 */ > + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a2.rgmii2_td3 */ > + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a7.rgmii2_rclk */ > + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a1.rgmii2_rtcl */ > + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a11.rgmii2_rd0 */ > + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a10.rgmii2_rd1 */ > + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a9.rgmii2_rd2 */ > + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* > gpmc_a8.rgmii2_rd3 */ > + >; > + }; > + > + cpsw_sleep: cpsw_sleep { > + pinctrl-single,pins = < > + /* Slave 1 reset value */ > + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + > + /* Slave 2 reset value */ > + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + >; > + }; > + > + davinci_mdio_default: davinci_mdio_default { > + pinctrl-single,pins = < > + /* MDIO */ > + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | > MUX_MODE0) /* mdio_data.mdio_data */ > + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) > /* mdio_clk.mdio_clk */ > + >; > + }; > + > + davinci_mdio_sleep: davinci_mdio_sleep { > + pinctrl-single,pins = < > + /* MDIO reset value */ > + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) > + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) > + >; > + }; > + > + dss_pins: dss_pins { > + pinctrl-single,pins = < > + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* > gpmc ad 8 -> DSS DATA 23 */ > + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) > + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) > + 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) > + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) > + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) > + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) > + 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* > gpmc ad 15 -> DSS DATA 16 */ > + 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS > DATA 0 */ > + 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) > + 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS > DATA 15 */ > + 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS > VSYNC */ > + 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS > HSYNC */ > + 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS > PCLK */ > + 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS > AC BIAS EN */ > + > + >; > + }; > + > + qspi_pins: qspi_pins { > + pinctrl-single,pins = < > + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* > gpmc_csn0.qspi_csn */ > + 0x88 (PIN_OUTPUT | MUX_MODE2) /* > gpmc_csn3.qspi_clk */ > + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* > gpmc_advn_ale.qspi_d0 */ > + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* > gpmc_oen_ren.qspi_d1 */ > + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* > gpmc_wen.qspi_d2 */ > + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* > gpmc_be0n_cle.qspi_d3 */ > + >; > + }; > + > + mcasp1_pins: mcasp1_pins { > + pinctrl-single,pins = < > + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* > mii1_crs.mcasp1_aclkx */ > + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* > mii1_rxerr.mcasp1_fsx */ > + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) > /* mii1_col.mcasp1_axr2 */ > + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* > rmii1_ref_clk.mcasp1_axr3 */ > + >; > + }; > + > + lcd_pins: lcd_pins { > + pinctrl-single,pins = < > + /* GPIO 5_8 to select LCD / HDMI */ > + 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) > + >; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins>; > + clock-frequency = <400000>; > + > + tps@24 { > + compatible = "ti,tps65218"; > + reg = <0x24>; > + interrupt-parent = <&gic>; > + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + dcdc1: regulator-dcdc1 { > + compatible = "ti,tps65218-dcdc1"; > + /* VDD_CORE limits min of OPP50 and max of OPP100 > */ > + regulator-name = "vdd_core"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <1144000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + dcdc2: regulator-dcdc2 { > + compatible = "ti,tps65218-dcdc2"; > + /* VDD_MPU limits min of OPP50 and max of > OPP_NITRO */ > + regulator-name = "vdd_mpu"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <1378000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + dcdc3: regulator-dcdc3 { > + compatible = "ti,tps65218-dcdc3"; > + regulator-name = "vdds_ddr"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + dcdc4: regulator-dcdc4 { > + compatible = "ti,tps65218-dcdc4"; > + regulator-name = "v3_3d"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo1: regulator-ldo1 { > + compatible = "ti,tps65218-ldo1"; > + regulator-name = "v1_8d"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + }; > + > + at24@50 { > + compatible = "at24,24c256"; > + pagesize = <64>; > + reg = <0x50>; > + }; > +}; > + > +&i2c1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins>; > + clock-frequency = <400000>; > + > + edt-ft5306@38 { > + status = "okay"; > + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; > + pinctrl-names = "default"; > + pinctrl-0 = <&edt_ft5306_ts_pins>; > + > + reg = <0x38>; > + interrupt-parent = <&gpio0>; > + interrupts = <31 0>; > + > + wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; > + > + touchscreen-size-x = <480>; > + touchscreen-size-y = <272>; > + }; > + > + tlv320aic3106: tlv320aic3106@1b { > + compatible = "ti,tlv320aic3106"; > + reg = <0x1b>; > + status = "okay"; > + > + /* Regulators */ > + AVDD-supply = <&dcdc4>; > + IOVDD-supply = <&dcdc4>; > + DRVDD-supply = <&dcdc4>; > + DVDD-supply = <&ldo1>; > + }; > + > + lis331dlh@18 { > + compatible = "st,lis331dlh"; > + reg = <0x18>; > + status = "okay"; > + > + Vdd-supply = <&dcdc4>; > + Vdd_IO-supply = <&dcdc4>; > + interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>; > + }; > +}; > + > +&epwmss0 { > + status = "okay"; > +}; > + > +&ecap0 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&ecap0_pins>; > +}; > + > +&gpio0 { > + status = "okay"; > +}; > + > +&gpio1 { > + status = "okay"; > +}; > + > +&gpio5 { > + status = "okay"; > +}; > + > +&mmc1 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc1_pins>; > + > + vmmc-supply = <&dcdc4>; > + bus-width = <4>; > + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; > + > +&usb2_phy1 { > + status = "okay"; > +}; > + > +&usb1 { > + dr_mode = "peripheral"; > + status = "okay"; > +}; > + > +&usb2_phy2 { > + status = "okay"; > +}; > + > +&usb2 { > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&qspi { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&qspi_pins>; > + > + spi-max-frequency = <48000000>; > + m25p80@0 { > + compatible = "mx66l51235l"; > + spi-max-frequency = <48000000>; > + reg = <0>; > + spi-cpol; > + spi-cpha; > + spi-tx-bus-width = <1>; > + spi-rx-bus-width = <4>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + /* MTD partition table. > + * The ROM checks the first 512KiB > + * for a valid file to boot(XIP). > + */ > + partition@0 { > + label = "QSPI.U_BOOT"; > + reg = <0x00000000 0x000080000>; > + }; > + partition@1 { > + label = "QSPI.U_BOOT.backup"; > + reg = <0x00080000 0x00080000>; > + }; > + partition@2 { > + label = "QSPI.U-BOOT-SPL_OS"; > + reg = <0x00100000 0x00010000>; > + }; > + partition@3 { > + label = "QSPI.U_BOOT_ENV"; > + reg = <0x00110000 0x00010000>; > + }; > + partition@4 { > + label = "QSPI.U-BOOT-ENV.backup"; > + reg = <0x00120000 0x00010000>; > + }; > + partition@5 { > + label = "QSPI.KERNEL"; > + reg = <0x00130000 0x0800000>; > + }; > + partition@6 { > + label = "QSPI.FILESYSTEM"; > + reg = <0x00930000 0x36D0000>; > + }; > + }; > +}; > + > +&mac { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&cpsw_default>; > + pinctrl-1 = <&cpsw_sleep>; > + dual_emac = <1>; > + status = "okay"; > +}; > + > +&davinci_mdio { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&davinci_mdio_default>; > + pinctrl-1 = <&davinci_mdio_sleep>; > + status = "okay"; > +}; > + > +&cpsw_emac0 { > + phy_id = <&davinci_mdio>, <4>; > + phy-mode = "rgmii"; > + dual_emac_res_vlan = <1>; > +}; > + > +&cpsw_emac1 { > + phy_id = <&davinci_mdio>, <5>; > + phy-mode = "rgmii"; > + dual_emac_res_vlan = <2>; > +}; > + > +&elm { > + status = "okay"; > +}; > + > +&mcasp1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&mcasp1_pins>; > + > + status = "okay"; > + > + op-mode = <0>; > + tdm-slots = <2>; > + serial-dir = < > + 0 0 1 2 > + >; > + > + tx-num-evt = <1>; > + rx-num-evt = <1>; > +}; > + > +&dss { > + status = "okay"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&dss_pins>; > + > + port { > + dpi_out: endpoint@0 { > + remote-endpoint = <&lcd_in>; > + data-lines = <24>; > + }; > + }; > +}; > + > +&rtc { > + status = "okay"; > +}; > + > +&wdt { > + status = "okay"; > +}; > -- > 2.0.0.390.gcb682f8 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06/23/2014 02:20 PM, Felipe Balbi wrote: > Add support for TI's AM437x StarterKit Evaluation > Module. > > Cc: Josh Elliot <jelliott@ti.com> > Cc: Darren Etheridge <detheridge@ti.com> > Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Tom Rini <trini@ti.com>
On 06/23/2014 01:20 PM, Felipe Balbi wrote: > Add support for TI's AM437x StarterKit Evaluation > Module. > > Cc: Josh Elliot <jelliott@ti.com> > Cc: Darren Etheridge <detheridge@ti.com> > Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Darren Etheridge <detheridge@ti.com> I tested with omap2plus_defconfig + additionally enabling OMAPDSS and Backlight in .config. Working great for me with ethernet, sdcard, lcd panel and backlight all functional. dmesg log attached - generated by kernel built from the repo/branch Felipe pointed to in the cover letter for this series and obviously running on an AM437x StarterKit EVM. Darren
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index d22b216..0edc903 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -129,6 +129,9 @@ Boards: - AM437x GP EVM compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43" +- AM437x SK EVM: AM437x StarterKit Evaluation Module + compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43" + - DRA742 EVM: Software Development Board for DRA742 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 621c6c5..a85a4b8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -306,6 +306,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-var-dvk-om44.dtb \ omap4-var-stk-om44.dtb dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \ + am437x-sk-evm.dtb \ am437x-gp-evm.dtb dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ omap5-sbc-t54.dtb \ diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts new file mode 100644 index 0000000..859ff3d --- /dev/null +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -0,0 +1,613 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* AM437x SK EVM */ + +/dts-v1/; + +#include "am4372.dtsi" +#include <dt-bindings/pinctrl/am43xx.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "TI AM437x SK EVM"; + compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43"; + + aliases { + display0 = &lcd0; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM437x-SK-EVM"; + ti,audio-codec = <&tlv320aic3106>; + ti,mcasp-controller = <&mcasp1>; + ti,codec-clock-rate = <24000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT"; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_pins>; + + debounce-delay-ms = <5>; + col-scan-delay-us = <1500>; + + row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */ + &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */ + + col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */ + &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */ + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_DOWN) + MATRIX_KEY(0, 1, KEY_RIGHT) + MATRIX_KEY(1, 0, KEY_LEFT) + MATRIX_KEY(1, 1, KEY_UP) + >; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led@0 { + label = "am437x-sk:red:heartbeat"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@1 { + label = "am437x-sk:green:mmc1"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */ + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@2 { + label = "am437x-sk:blue:cpu0"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */ + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@3 { + label = "am437x-sk:blue:usr3"; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */ + default-state = "off"; + }; + }; + + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <43>; + hsync-len = <4>; + vback-porch = <12>; + vfront-porch = <4>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; +}; + +&am43xx_pinmux { + matrix_keypad_pins: matrix_keypad_pins { + pinctrl-single,pins = < + 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */ + 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */ + 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */ + 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */ + >; + }; + + leds_pins: leds_pins { + pinctrl-single,pins = < + 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */ + 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */ + 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */ + 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */ + >; + }; + + i2c0_pins: i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: i2c1_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + ecap0_pins: backlight_pins { + pinctrl-single,pins = < + 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + >; + }; + + edt_ft5306_ts_pins: edt_ft5306_ts_pins { + pinctrl-single,pins = < + 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + + /* Slave 2 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value */ + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ + 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + + >; + }; + + qspi_pins: qspi_pins { + pinctrl-single,pins = < + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + >; + }; + + mcasp1_pins: mcasp1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPIO 5_8 to select LCD / HDMI */ + 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + tps@24 { + compatible = "ti,tps65218"; + reg = <0x24>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65218-dcdc1"; + /* VDD_CORE limits min of OPP50 and max of OPP100 */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + compatible = "ti,tps65218-dcdc2"; + /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + compatible = "ti,tps65218-dcdc3"; + regulator-name = "vdds_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc4: regulator-dcdc4 { + compatible = "ti,tps65218-dcdc4"; + regulator-name = "v3_3d"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,tps65218-ldo1"; + regulator-name = "v1_8d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + }; + + at24@50 { + compatible = "at24,24c256"; + pagesize = <64>; + reg = <0x50>; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <31 0>; + + wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <272>; + }; + + tlv320aic3106: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&dcdc4>; + IOVDD-supply = <&dcdc4>; + DRVDD-supply = <&dcdc4>; + DVDD-supply = <&ldo1>; + }; + + lis331dlh@18 { + compatible = "st,lis331dlh"; + reg = <0x18>; + status = "okay"; + + Vdd-supply = <&dcdc4>; + Vdd_IO-supply = <&dcdc4>; + interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + vmmc-supply = <&dcdc4>; + bus-width = <4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; +}; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "mx66l51235l"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpol; + spi-cpha; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first 512KiB + * for a valid file to boot(XIP). + */ + partition@0 { + label = "QSPI.U_BOOT"; + reg = <0x00000000 0x000080000>; + }; + partition@1 { + label = "QSPI.U_BOOT.backup"; + reg = <0x00080000 0x00080000>; + }; + partition@2 { + label = "QSPI.U-BOOT-SPL_OS"; + reg = <0x00100000 0x00010000>; + }; + partition@3 { + label = "QSPI.U_BOOT_ENV"; + reg = <0x00110000 0x00010000>; + }; + partition@4 { + label = "QSPI.U-BOOT-ENV.backup"; + reg = <0x00120000 0x00010000>; + }; + partition@5 { + label = "QSPI.KERNEL"; + reg = <0x00130000 0x0800000>; + }; + partition@6 { + label = "QSPI.FILESYSTEM"; + reg = <0x00930000 0x36D0000>; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <5>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&elm { + status = "okay"; +}; + +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp1_pins>; + + status = "okay"; + + op-mode = <0>; + tdm-slots = <2>; + serial-dir = < + 0 0 1 2 + >; + + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&dss { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&wdt { + status = "okay"; +};
Add support for TI's AM437x StarterKit Evaluation Module. Cc: Josh Elliot <jelliott@ti.com> Cc: Darren Etheridge <detheridge@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> --- changes since v1: - add pinctrl for leds and matrix keypad - added i2c1 and i2c0 speeds of 400k - added voltage for vdds_ddr - reordered mmc1 node left the USB supply thing out because a) the driver doesn't use it and b) the regulator will be automatically sitched off iff DRVVBUS signal goes low (that's done automatically by the HW). Not to mention that there's really no benefit from the kernel or userland point of view. (I do have a patch for that locally though, so if people really want it, I can easily fold the patch into this). All patches are available at [1] [1] https://git.kernel.org/cgit/linux/kernel/git/balbi/usb.git/log/?h=am437x-starterkit .../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am437x-sk-evm.dts | 613 +++++++++++++++++++++ 3 files changed, 617 insertions(+) create mode 100644 arch/arm/boot/dts/am437x-sk-evm.dts