| Message ID | 1401442715-6350-2-git-send-email-lee.jones@linaro.org |
|---|---|
| State | New |
| Headers | show |
Hi Lee, > +Example: > + > + temp1@fdfe8000 { > + compatible = "st,stih416-mpe-thermal"; > + reg = <0xfdfe8000 0x10>; > + clock-names = "thermal"; > + clocks = <&CLK_M_MPETHSENS>; > + interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>; > + }; With the renaming of the STI device tree from upper to lower case. The clock name in this example also needs updating. Once fixed: - Acked-by: Peter Griffin <peter.griffin@linaro.org> Regards, Peter -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 05 Jun 2014, Peter Griffin wrote: > Hi Lee, > > > +Example: > > + > > + temp1@fdfe8000 { > > + compatible = "st,stih416-mpe-thermal"; > > + reg = <0xfdfe8000 0x10>; > > + clock-names = "thermal"; > > + clocks = <&CLK_M_MPETHSENS>; > > + interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>; > > + }; > > With the renaming of the STI device tree from upper to lower > case. The clock name in this example also needs updating. You're right. Will rebase and fix. > Once fixed: - > Acked-by: Peter Griffin <peter.griffin@linaro.org> > > Regards, > > Peter
diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt new file mode 100644 index 0000000..8537fdc --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt @@ -0,0 +1,42 @@ +Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs. + +Required parameters: +------------------- + +compatible : st,<SoC>-<module>-thermal; should be one of: + "st,stih415-sas-thermal", + "st,stih415-mpe-thermal", + "st,stih416-sas-thermal" + "st,stih416-mpe-thermal" + "st,stid127-thermal" or + "st,stih407-thermal" + according to the SoC type (stih415, stih416, stid127, stih407) + and module type (sas or mpe). On stid127 & stih407 there is only + one die/module, so there is no module type in the compatible + string. +clock-names : Should be "thermal". + See: Documentation/devicetree/bindings/resource-names.txt +clocks : Phandle of the clock used by the thermal sensor. + See: Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional parameters: +------------------- + +reg : For non-sysconf based sensors, this should be the physical base + address and length of the sensor's registers. +interrupts : Standard way to define interrupt number. + Interrupt is mandatory to be defined when compatible is + "stih416-mpe-thermal". + NB: For thermal sensor's for which no interrupt has been + defined, a polling delay of 1000ms will be used to read the + temperature from device. + +Example: + + temp1@fdfe8000 { + compatible = "st,stih416-mpe-thermal"; + reg = <0xfdfe8000 0x10>; + clock-names = "thermal"; + clocks = <&CLK_M_MPETHSENS>; + interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>; + };